Hotline: 096 779 3398 Email: [email protected]
Secateurs spare blade

7/3 F-Gold

★ 0.0 (0 reviews)
Sold: 0
Views: 0
Origin: Made in Switzerland

Coated with the FELCO F-Gold anti-friction surface, this replacement blade restores clean cuts on compatible FELCO pruning shears. Net thickness measures 2.95 mm and net weight 24 g. Packed, the item reaches 4 mm and 31 g. The coating lowers drag as the edge passes through wood fibre. Fitting a new blade brings a worn hand pruner back into service.

SKU: 7-3 F-Gold
€36.86
Stock status: Out of stock
Indicative price
Description

Pruning shear replacement blade 7-3 F-Gold carries the FELCO F-Gold anti-friction surface on the cutting part. It serves as a spare blade for compatible FELCO hand pruners. The coating reduces drag while the edge travels through wood fibre. Cutting therefore stays lighter during long pruning sessions. Net thickness is 2.95 mm and net weight is 24 g.

With packaging included, thickness reaches 4 mm and weight reaches 31 g. The code belongs to the FELCO spare part range. Replacing a worn blade restores cut quality on a pruner that has been in service for several seasons. A clean cut helps the plant recover faster after trimming. Growers usually keep spare blades in stock before the pruning season starts. Check the model of your pruner against the FELCO spare part list before ordering.

Pruning shear replacement blade 7-3 F-Gold technical overview

F-Gold anti-friction coating

The F-Gold layer lowers resistance between the blade and the material being cut. Repeated pruning cycles then demand less hand effort. FELCO states that the coating wears down over time under mechanical stress. The most visible wear appears on the cutting edge and at the contact zone with the anvil blade. This behaviour is normal in service.

  • F-Gold coating reduces friction during the cut
  • Natural wear at the cutting edge and anvil contact area
  • Local loss of coating does not stop the cutting function
  • Such wear is not treated as a manufacturing defect
  • Classified as a genuine FELCO spare part

Operators should watch the condition of the cutting edge while working. When the blade is chipped or heavily worn, replacement works better than repeated sharpening. The spare blade fits compatible FELCO pruners according to the manufacturer instructions. After fitting, check the clearance between blade and counter blade. Correct clearance keeps the cut decisive and prevents crushing of plant tissue.

Dimensions and weight

The part is thin and light, matching the construction of a hand pruning shear. Packed data lists 4 mm thickness and 31 g weight, while the bare blade is thinner and lighter. These figures help when planning shipping or when storing a set of spares in a workshop drawer.

  • Net thickness: 2.95 mm
  • Net weight: 24 g
  • Thickness with packaging: 4 mm
  • Weight with packaging: 31 g
  • Surface: F-Gold coating

Before placing an order, compare the code of your current pruner with the FELCO spare part catalogue. A replacement blade only fits the models named by the manufacturer. Other blade references are listed in the pruning shear blade section of the catalogue. Keep the blade clean and dry after each working session to limit rust on the steel.

Common applications

This blade is used for pruning work in fruit orchards and vineyards. Professional gardeners change the blade once the edge has worn after several seasons. Urban tree care services keep spare blades ready for field crews. Nurseries and flower farms fit new blades so cuts stay clean and tissue damage stays low. Tool maintenance workshops also stock the part to repair customer pruners quickly.

Notes for use

Replace the blade when the tool is cool and clean. Use a screwdriver of the correct size for the fixing screw. Tighten the nut enough for smooth blade movement without play. Gradual loss of the coating is normal and does not reduce cut quality on its own.


Specifications

  • Part type: replacement blade for compatible hand pruning shears
  • Surface treatment: F-Gold anti-friction coating
  • Net thickness: 2.95 mm
  • Net weight: 24 g
  • Thickness with packaging: 4 mm
  • Weight with packaging: 31 g
  • Wear pattern: coating wears at the cutting edge and anvil contact zone under mechanical stress
  • Fitting: mounted on pruner models listed in the manufacturer spare part range

Product reviews

Based on 0 reviews
0.0
Overall
5★ 0
4★ 0
3★ 0
2★ 0
1★ 0

Be the first to review “7/3 F-Gold”

🎁 Write a review to earn 20 reward points — photo +10, video +15.
Accumulate reward points to redeem unique gifts from Minh Khang Vinatools. Log in
Please log in to submit a review.
Recently viewed
No items yet