Hotline: 096 779 3398 Email: [email protected]
Sealove Transplanter

Staggered 3 prong hand cultivator EPOCA 8837.G41 for garden care

★ 0.0 (0 reviews)
Sold: 8
Views: 0
Imported from: Italy
Origin: Made in Italy

Three staggered prongs rake fallen leaves, twigs and garden litter under tree canopies. The middle prong sits shorter than the two outer ones, so raking force spreads layer by layer. Curved, thin-tapered tips slip past surface roots without digging deep. Body and handle use reinforced fiberglass in black, made in Italy by EPOCA. Sold per piece with 12-month warranty.

SKU: 12395
€2.82
Stock status: 1
Indicative price
Description

The staggered 3 prong hand cultivator EPOCA 8837.G41 clears leaves, fallen twigs and litter under tree canopies. Its three prongs sit out of line with each other. The middle prong is shorter than the two outer prongs. Each tine curves at the knuckle and tapers to a thin tip. That geometry lets the tines pass between roots and long leaves. The tool skims the surface instead of turning deep soil.

Body and handle are made from reinforced fiberglass in black, produced in Italy by EPOCA. The tool suits home gardeners, plant nurseries and seedling research units. It belongs to the soil-working group used on planting beds and potted plants. The unit of sale is one piece, with a 12-month warranty and nationwide distribution.

Features of the staggered 3 prong hand cultivator EPOCA 8837.G41

Construction and material

The working head carries three prongs placed out of line. Shortening the middle prong spreads raking force across separate layers of debris. The knuckle of each tine is curved, and the tip is ground thin so it enters decaying leaf litter easily. Body and handle use reinforced fiberglass instead of wood, which avoids insect damage common to wooden handles.

  • Tool type: staggered 3 prong hand cultivator, model 8837.G41
  • Middle prong shorter than the two outer prongs
  • Curved knuckle with thin-tapered prong tips
  • Material of body and handle: reinforced fiberglass
  • Colour: black
  • Hand-held format for close-range work

Because the prongs are offset, the tines grip the upper leaf layer first and only then reach the topsoil. A light pull gathers small branches and dry leaves. The thin tips reduce hard contact with exposed roots. Fiberglass also resists the warping and splitting seen on timber handles after wet storage.

Scope of use

The cultivator works on planting beds, potted plants and the ground around tree collars. Main operations include raking fallen leaves, gathering twig waste and combing off mulch from the growing surface. The compact head fits narrow gaps between trunks and works inside seedling trays, where larger rakes cannot be positioned accurately.

  • Raking fallen leaves under tree canopies
  • Collecting small branches and garden waste
  • Combing off the mulch layer on growing soil
  • Loosening the topsoil around tree collars
  • Use in nurseries and seedling test plots

Typical users are households caring for ornamental plants, nursery technicians and staff at seedling research institutes. The tool also helps during repotting, when the substrate surface must be cleaned before fertiliser is applied. After work, wash off soil residue and let the tool dry fully before storage.

Common applications

In home gardens, the cultivator pulls dry leaves out of flower beds and from around fruit trees. In nurseries, it clears substrate on trays and seed beds. In seedling research areas, light combing of the surface layer allows root checks with little disturbance. The same head also removes small weeds growing between tree collars. Close-range control makes it practical in tight spaces between pots and rows.

Catalogue notes

Catalogue data lists the item as a hand-held three-prong garden cultivator, trade name Habitat 3 Prong Cultivator. The offset prong layout, curved knuckles and thin-tapered tips are the defining structural points. Fiberglass replaces timber in both body and handle. Stated uses cover leaf raking, waste collection, mulch combing, topsoil loosening and small weeding on beds, pots and seedling trays.

Store the cultivator dry after cleaning to keep soil from hardening on the prongs. Keep it with other hand tools used for bed and pot maintenance. For work needing a different prong layout, see related hand forks in the same Habitat range.


Specifications

  • Tool type: hand-held three-prong garden cultivator
  • Model reference: 8837.G41
  • Prong layout: three prongs set out of line (staggered)
  • Middle prong shorter than the two outer prongs
  • Prong form: curved knuckle, thin-tapered tip
  • Working action: surface raking without deep soil turning
  • Body and handle material: reinforced fiberglass
  • Handle characteristics: not subject to insect attack or warping like timber
  • Colour: black
  • Working range: planting beds, potted plants, seedling trays
  • Functions: leaf raking, twig and garden waste collection, mulch combing, topsoil loosening, small weeding
  • Care: wash off soil residue and dry before storage
  • Unit of sale: piece
  • Warranty: 12 months

Product reviews

Based on 0 reviews
0.0
Overall
5★ 0
4★ 0
3★ 0
2★ 0
1★ 0

Be the first to review “Staggered 3 prong hand cultivator EPOCA 8837.G41 for garden care”

🎁 Write a review to earn 20 reward points — photo +10, video +15.
Accumulate reward points to redeem unique gifts from Minh Khang Vinatools. Log in
Please log in to submit a review.
Recently viewed
No items yet