Product details
- Accessories for BESSEY one-hand clamps EZ360-30, EZ360-45, EZ360-60 and EZL30-8, EZL45-8, EZL60-8
- For fast and precise adjustment of decking boards up to 20 cm width
- For 6, 7, 8 and 10 mm (1/4", 9/32", 5/16" and 3/8") spacing between decking boards
- Tool-free assembly
Areas of application
Laying decking boards
DIY
Safety information
Use the product only in its original condition.
Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
- Wear safety glasses to protect your eyes.
- Wear work or assembly gloves to protect your hands.
- Wear safety footwear to protect your feet.
- Thew handle must always be free of oil and grease to prevent slipping.
- Keep the product out of reach of children.
- Small parts must not be swallowed or inserted into body openings.
- Check the product for damage before each use and make sure that all moving parts are working properly.
- A damaged product must not be used.
- Follow the care instructions for each product – see vinatools.com.
- Use only original BESSEY spare parts
- The clamping tool must not be used for lifting, pulling or leaning.
- The clamping tool must not be used to secure cargo during transportation.
- The clamping tool may only be tightened by hand without any additional aids.
- The clamping tool must not be used for permanent installation.
- Regularly check that the end stop is working properly when using clamps.
Material / Surface
Plastic PA6
Care instructions
Clean the rails with solvent.
Clean in regular cycles, depending on the degree of soiling.
| Specification | Value |
|---|
| Suitable for- | EZ360 and EZL (from 300 mm opening) |
|---|
| Content- | 4 x special protective cap 10 x spacer |
|---|
| Weight (kg) | 0.273 |
|---|
| Suitable for | EZ360 and EZL (from 300 mm opening) |
|---|
| Content | 4 x special protective cap 10 x spacer |
|---|