Cuts branches up to 20 mm diameter with a bypass mechanism optimized for left-handed users. Forged aluminium handles measure 195 mm in total length. The tool weighs 210 g and features a hardened steel blade, wire-cutting notch, and replaceable shock absorber. Swiss-made construction ensures long-term reliability.
This left-handed bypass pruning shear cuts fresh branches up to 20 mm in diameter. The forged aluminium handles span 195 mm and weigh 210 g. A hardened steel blade delivers clean cuts on soft to medium plant material. The ergonomic grip suits medium-sized hands and reduces fatigue during extended pruning sessions.
The bypass cutting mechanism positions the blade and counter-blade in a scissor-like arrangement. Three exposed rivets secure the blade to the handle. A wire-cutting notch near the pivot accommodates thin wire without requiring separate pliers. The coil spring opens the handles smoothly after each cut.
The one-piece aluminium frame is cast for left-handed operation.

Contoured grips prevent slippage and distribute pressure evenly across the palm. A shock-absorbing buffer sits between the handles to reduce impact on the wrist. The locking mechanism uses a sliding catch that engages with one hand.
The pivot assembly holds the two handle arms in alignment during repeated cuts. A threaded adjustment screw lets users fine-tune blade clearance as the tool wears. All fasteners remain accessible for field maintenance.
The 42 mm hardened steel blade undergoes high-frequency tempering for edge retention. The bypass action brings the blade past a fixed counter-blade, producing a shearing cut that minimizes tissue damage. A wire-cutting notch at the base handles thin gauge wire without dulling the main edge.
The blade attaches with three exposed rivets that can be drilled out for replacement. The counter-blade is held by a single screw. Both components are available as spare parts for field replacement.
A nickel-plated coil spring returns the handles to the open position after each cut.

The spring slides onto a post and can be removed without tools. A rubber buffer between the handles cushions the impact when the tool opens fully.
The shock absorber compresses slightly with each cut, reducing vibration transmitted to the hand. Replacement buffers are available when the original wears or hardens over time.
This tool suits vineyard pruning, orchard maintenance, and ornamental plant care where left-handed operation is required.
The 20 mm cutting capacity handles grapevine canes, rose stems, and small fruit-tree branches. The wire-cutting notch is useful for bonsai training wire and trellis repair. Landscape professionals use it for detail work on shrubs and perennials. The compact size fits into tool belts and pruning holsters.
All wear components are available as individual spare parts. The blade, counter-blade, spring, shock absorber, and pivot hardware can be replaced in the field. The manufacturer provides part numbers for each component. Regular cleaning and occasional oiling of the pivot extend service life. The adjustment screw should be checked periodically to maintain proper blade clearance.
| SKU | Image | Price VNĐ | Product name & short description | |
|---|---|---|---|---|
| 2-13 |
![]() |
€0.88
|
2/13
2/13 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 2-20 |
![]() |
€1.38
|
2/20
2/20 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 2-18 |
![]() |
€1.38
|
2/18
2/18 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 6-91 |
![]() |
€6.90
|
6/91
6/91 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 2-16 |
![]() |
€2.39
|
2/16
2/16 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 2-93 |
![]() |
€11.92
|
2/93
2/93 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 2-10 |
![]() |
€5.59
|
2/10
2/10 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 2-5B |
![]() |
€0.88
|
2/5B
2/5B is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 6-94 |
![]() |
€12.93
|
6/94
6/94 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 6-7 |
![]() |
€3.64
|
6/7
6/7 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 16-4 |
![]() |
€21.44
|
16/4
16/4 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 6-6 |
![]() |
€3.64
|
6/6
6/6 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 16-3 |
![]() |
€19.62
|
16/3
16/3 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 2-30 |
![]() |
€0.88
|
2/30
2/30 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 2-9 |
![]() |
€7.27
|
2/9
2/9 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 6-8 |
![]() |
€8.45
|
6/8
6/8 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 9-12 |
![]() |
€3.27
|
9/12
9/12 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 6-90 |
![]() |
€17.30
|
6/90
6/90 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 16-1 |
![]() |
€27.64
|
16/1
16/1 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 16-2 |
![]() |
€18.04
|
16/2
16/2 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 16-36 |
![]() |
€8.08
|
16/36
16/36 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| C16-4 |
![]() |
€1.01
|
C16/4
C16/4 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 16-35 |
![]() |
€8.08
|
16/35
16/35 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 9-15 |
![]() |
€3.27
|
9/15
9/15 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|










| SKU Code | Price (EUR) | Stock | |
|---|---|---|---|
| Loading variants... | |||








