Hotline: 096 779 3398 Email: [email protected]
Garden tools accessories

Pruning shear anvil blade with screw FELCO 7-4

★ 0.0 (0 reviews)
Sold: 0
Views: 0
Origin: Made in Switzerland

Replacing a worn anvil blade restores the original gap between the two cutting blades. The FELCO 7-4 set includes one anvil blade and one 7-6 fixing screw. Net weight is 0.047 kg, with 0.0547 kg packed and 8 mm packaging thickness. Gardeners can fit it in the field using ordinary hand tools, then check blade movement.

SKU: 7-4
€21.41
Stock status: Out of stock
Indicative price
Description

The pruning shear anvil blade with screw FELCO 7-4 is a genuine replacement component for compatible FELCO hand pruners. The kit contains one anvil blade coded 7-4 and one fixing screw coded 7-6. The anvil blade works as the fixed bearing surface, opposite the moving cutting blade. Every branch is pressed against this surface during the cut.

When the anvil wears down or deforms, the support face is no longer flat. Cuts then crush the stem, bark tears more easily and wounds close slowly. Fitting a new anvil blade brings the clearance between the two blades back to its original state. Net weight of the part is 0.047 kg, and 0.0547 kg including packaging. Packaging thickness is 8 mm. The part is made in Switzerland and can be replaced on site with ordinary hand tools.

Pruning shear anvil blade with screw FELCO 7-4: construction and function

Role within the blade set

The anvil blade bolts to the pruner body through the supplied 7-6 screw. Together they form the fixed half of the cutting pair. Using genuine parts keeps the two blades matched to the manufacturer tolerance. Closing force is then spread evenly along the edge, so the hand tires less during repeated cutting. After fitting, tighten the screw moderately and test the blade travel.

  • Set contents: 1 x anvil blade 7-4 and 1 x screw 7-6
  • Category: FELCO replacement spare part
  • Net weight: 0.047 kg
  • Gross weight with packaging: 0.0547 kg
  • Packaging thickness: 8 mm
  • Origin: Switzerland

Check that the blade opens and closes smoothly after assembly. There should be no lateral play and no binding at the end of the stroke. If the blade still catches, loosen the screw and realign the anvil. Other parts of the same family are listed in the FELCO pruning shear blade category.

When the anvil blade should be replaced

Wear builds up over several pruning seasons, mainly on hard and dry wood. The clearest sign is torn bark along the contact face of the cut. The bearing surface may also show grooves caused by long rubbing from the cutting blade. At that stage sharpening no longer helps, so the part should be renewed.

  • Bearing face visibly grooved or hollowed
  • Branches crushed instead of cleanly severed
  • Unusually wide gap between the two blades
  • Worn screw thread that no longer holds the anvil firmly

Before removal, clean the sap built up around the hinge area. Use a cloth and a suitable solvent on the mounting groove. Once the new part is fitted, apply a thin film of oil on the pivot. Test the fit with a few cuts on small branches before returning to full work.

Common applications

This spare serves routine maintenance of hand pruners in fruit orchards. Vineyards, citrus growers and ornamental plant nurseries often replace the anvil after each pruning season. Urban tree care teams keep spares in stock for quick field repairs. Nurseries that use pruners continuously see faster wear rates. On-site replacement shortens downtime and keeps crews working through the pruning window.

Ordering notes from the catalog

Check the FELCO pruner model in use before ordering the 7-4 anvil blade. Each pruner line has its own blade set, and parts are not freely interchangeable. If both blades show wear, replace the cutting blade at the same time. Keep the packaging with its code for easier reordering later.


Specifications

  • Set contents: 1 x anvil blade 7-4 and 1 x fixing screw 7-6
  • Function: fixed bearing blade for compatible hand pruners
  • Net weight: 0.047 kg
  • Gross weight including packaging: 0.0547 kg
  • Packaging thickness: 8 mm
  • Installation: hand-tool fitting, screw-mounted to the pruner body

Product reviews

Based on 0 reviews
0.0
Overall
5★ 0
4★ 0
3★ 0
2★ 0
1★ 0

Be the first to review “Pruning shear anvil blade with screw FELCO 7-4”

🎁 Write a review to earn 20 reward points — photo +10, video +15.
Accumulate reward points to redeem unique gifts from Minh Khang Vinatools. Log in
Please log in to submit a review.
Recently viewed
No items yet