Hotline: 096 779 3398 Email: [email protected]
Corner clamps

Mini Vice S10

★ 0.0 (0 reviews)
Sold: 0
Views: 0
Imported from: Germany
Origin: Made in Germany

Low weight Parallel clamping with guide rods Clamping at an angle without guide rods (max. 25°) Easy to attach, with 2 table clamps supplied

SKU: S10-ST
€44.76
Stock status: Out of stock
Indicative price
Description

Product details

  • Low weight
  • Parallel clamping with guide rods
  • Clamping at an angle without guide rods (max. 25°)
  • Easy to attach, with 2 table clamps supplied

Product description

Parallel clamping

With guide rods, the mini vice S 10 is ideal for parallel clamping.

Clamping at an angle

When used without guide rods, the screw clamp S 10 is ideal for clamping at an angle.

Easily mounted

Two clips for quick and simple attachment to a table edge.

Areas of application

Furniture and joinery works

Interior fittings

  • DIY
  • Rapid, gentle clamping

Safety information

Use the product only in its original condition.

Use the product only for its intended purpose. Improper use can cause personal injury or property damage.

  • Wear safety glasses to protect your eyes.
  • Wear work or assembly gloves to protect your hands.
  • Wear safety footwear to protect your feet.
  • Thew handle must always be free of oil and grease to prevent slipping.
  • Keep the product out of reach of children.
  • Small parts must not be swallowed or inserted into body openings.
  • Check the product for damage before each use and make sure that all moving parts are working properly.
  • A damaged product must not be used.
  • Follow the care instructions for each product – see vinatools.com.
  • Use only original BESSEY spare parts
  • The clamping tool must not be used for lifting, pulling or leaning.
  • The clamping tool must not be used to secure cargo during transportation.
  • The clamping tool may only be tightened by hand without any additional aids.
  • The clamping tool must not be used for permanent installation.
  • Regularly check that the end stop is working properly when using clamps.

Material / Surface

Upper and lower section made of reinforced PA6 plastic

Spindle with trapezoidal thread in rolled steel, galvanised

  • Handle made of wood, water-based paint

Care instructions

Clean the rails with solvent.

Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.

Accessories / Suitable for

  • Table clamp TK6, RB269, LM10/5R8 | Especially for DIY applications and domestic appliances - Special accessory for angle clamps WS 3/WS 6, screw clamp S 10 and K Body REVO parallel clamps KRE/KREV and KR/KRV to hold them to a work surface edge | https://vinatools.com/static/bessey-mirror/pages/table-clamp-tk6-rb269-lm105r8-23e6040a46.html
SpecificationValue
Openingmm100
Jaw widthmm90
Weightkg0.825

Specifications

  • Loại: Ê tô mini kẹp bàn.
  • Độ mở hàm: 100 mm.
  • Bề rộng hàm kẹp: 90 mm.
  • Trọng lượng: 0,825 kg.
  • Kẹp song song bằng thanh dẫn hướng.
  • Kẹp góc đến 25° khi tháo thanh dẫn.
  • Lắp nhanh lên mép bàn bằng 2 ngàm kẹp đi kèm.
  • Kẹp nhanh, lực ép ổn định, không làm hỏng bề mặt phôi.
  • Thân bằng nhựa PA6 gia cường, cứng vững và bền.
  • Trục vít ren thang bằng thép mạ kẽm chống gỉ.
  • Tay quay gỗ cầm nắm chắc chắn.
  • Phù hợp cho gia công gỗ, lắp đặt nội thất, cơ khí, điện tử, mô hình và DIY.
  • Chỉ siết bằng tay, không dùng dụng cụ tăng lực.
  • Không dùng để nâng, kéo hoặc cố định hàng hóa khi vận chuyển.
  • Sử dụng phụ tùng thay thế chính hãng BESSEY.
Tags / Keywords: Mini Vice S10 S10-ST
Optional Accessories
SKU Image Price VNĐ Product name & short description
LM1-5R8 Table clamp TK6, RB269
€36.32
Table clamp TK6, RB269
Especially for DIY applications and domestic appliances Special accessory for angle clamps WS 3/WS 6, screw clamp S 10 and K Body REVO parallel clamps KRE/KREV and KR/KRV to hold them to a work surface edge
TK6 Table clamp, RB269, LM10/5R8
€7.47
Table clamp, RB269, LM10/5R8
Especially for DIY applications and domestic appliances Special accessory for angle clamps WS 3/WS 6, screw clamp S 10 and K Body REVO parallel clamps KRE/KREV and KR/KRV to hold them to a work surface edge

Product reviews

Based on 0 reviews
0.0
Overall
5★ 0
4★ 0
3★ 0
2★ 0
1★ 0

Be the first to review “Mini Vice S10”

🎁 Write a review to earn 20 reward points — photo +10, video +15.
Accumulate reward points to redeem unique gifts from Minh Khang Vinatools. Log in
Please log in to submit a review.
Recently viewed
No items yet