Hotline: 096 779 3398 Email: [email protected]
Plastic pipe cutters

Pipe cutter MCC VC-03, diameter from 27-63mm. MCC Japan

★ 0.0 (0 reviews)
Sold: 953
Views: 0
Imported from: Japan
Origin: Made in Japan

Kéo áp dụng cho ống có đường kính từ Ø26 đến Ø63mm tùy theo model. Có lỗ vát mép trên lưỡi cắt tùy theo models. Có lưỡi dự phòng như một phụ kiện mua thêm. Vết cắt sạch, gọn và không móp ống. Made in Japan. Nhập khẩu chính hãng.

SKU: VC-03
€0.00
Stock status: Out of stock
Indicative price
Description

Kéo cắt ống nhựa PVC, đường kính từ Ø26 đến Ø63mm tùy theo model. Đây là dòng kéo mới nhất và thừa hưởng mọi ưu điểm của thế hệ đi trước. Với 5 models khác nhau khả năng cắt OD lớn nhất Ø27mm, Ø34mm, Ø42mm, Ø48mm, Ø63mm.

Hãng MCC sản xuất tại Nhật Bản, thiết kế lại một dòng kéo cắt ống huyền thoại VC-02 Series. Nó trở lên dễ dàng thay thế lưỡi dự phòng hơn. Thẩm mỹ cao hơn và tất nhiên là sử dụng cũng tiện lợi hơn.

Kéo cắt ống nhựa VC-0342, cắt nẹp nhựa, model đặc biệt trong dòng này. Khi nó được tích hợp thêm tính năng cắt các nẹp vuông hoặc chữ nhật. Tiện dụng, đa năng cho người làm điện nước, lắp đặt hệ thống trong tòa nhà.

Chỉ với một phụ kiện bằng nhựa cứng màu vàng dưới đây, cây kéo cắt ống chuyển công năng sang cắt nẹp, ống gel.

Kéo cắt ống nhựa VC-03

Ngoại trừ VC-0334, VC-0348 không có chứng năng vát mép ống sau khi cắt. Còn lại VC-0327, VC-0342ED, VC-0363 đều có các lỗ hoặc rãnh khoét sẵn để bạn gọt mép ống sau khi cắt. Tiện ích dù nhỏ nhưng thực sự cần đến nó, bạn không cần phải dùng đến một công cụ khác.

Kéo cắt ống PVC khi nhả hết độ mở VC-42ED VC-0363 dao cắt ống mcc 01

Cơ cấu lò xo, ăn ngàm cơ khí chế tác đặc biệt để bạn nhả lưỡi cắt cực nhanh. Chỉ với 1 thao tác xé chuôi hay giãn tay cầm, miệng kéo cắt ống sẽ mở ra hết cỡ. Ngàm dưới luôn được vát lõm hình thang, dễ kẹp giữ ống trong suốt quá trình cắt.

  • Cán bằng hợp kim nhôm
  • Cơ cấu ăn khớp nhông
  • Lưỡi cắt bằng inox.
  • Có khoen khóa chuôi kéo
  • Sơn tĩnh điện chống bám bẩn.
  • Một số model có khe vát mép ngoài ống sau khi cắt.

Trong các model thuộc dòng họ kéo cắt ống này, VC-0342ED hay VC-0342A là các cách viết mã khác nhau của MCC. Chúng đều là 1, chỉ khác cho thị trường nội địa hoặc trong nước nên họ có ký hiệu để dễ nhận biết.

Chúng hoàn toàn không khác gì nhau. Đối với thị trường nội địa Nhật Bản, các thông điệp hướng dẫn sẽ được in tiếng Nhật, còn lại họ in tiếng Anh.

Kéo cắt ống nhựa VC-03 và các lưỡi thay thế

Lưỡi cắt dự phòng là một phụ kiện chọn lựa riêng, bạn có thể mua ngay cùng lúc với kéo hoặc bổ sung sau. Vật liệu của tất cả các lưỡi đều bằng inox có độ cứng cao, rèn áp lực, chống ăn mòn và rất bén.

Lưỡi dao không thể mẻ và không bao giờ mẻ lưỡi nếu bạn cắt đúng vật liệu là nhựa PVC, PE, composite hoặc ống cao su tổng hợp không có bố thép.

VCE0327 lưỡi cắt dự phòng cho VC-0327 VCE0334 lưỡi cắt dự phòng cho VC-0334 VCE0342 lưỡi cắt dự phòng cho VC-0342 VCE0348 lưỡi cắt dự phòng cho VC-0348 VCE0363 lưỡi cắt dự phòng cho VC-0363

Phần lớn hoặc hầu hết các trường hợp gây mẻ lưỡi chỉ do bạn phang nó vào kim loại. Thật khó để bạn nhận được câu trả lời thành thật cho câu hỏi "Anh đã cắt cái gì mà bị mẻ lưỡi vậy?". Thường bạn nhận được câu trả lời theo quy luật "Tôi nói vậy nhưng ý tôi không phải vậy". Và bạn phải tự suy ra. La Vie.

Các phụ tùng thay thế cho dòng kéo cắt ống nhựa VC-03. Các phụ kiện chính hãng này sẽ thay thế chung hay lấp lẫn qua các model VC-0327 - VC-0334 - VC-0342 - VC-0348. Chi tiết sẽ theo bảng phanh thây dưới đây. Bạn hãy theo hình vẽ để chọn đúng phụ kiện mong muốn.

Danh muc phu tung keo cat ong nhua VC 03

Bảng 16 phụ tùng kéo cắt ống nhựa MCC VC-03, dùng chung cho VC-0327, VC-0334, VC-0342 và VC-0348:

Số trên bản vẽ Mã Tên tiếng Việt Tên theo bản vẽ SL/kéo
1 VC-03-P01 Tay cầm phải Handle (Right) 1
2 VC-03-P02 Tay cầm trái Handle (Left) 1
3 (VCE0327…VCE0348) Lưỡi cắt — đã có bài VCE03- Blade 1
4 VC-03-P04 Bánh cóc Ratchet 1
5 VC-03-P05 Chấu hãm Pawl 1
6 VC-03-P06 Bu lông trục lưỡi Bolt 1
7 VC-03-P07 Đai ốc trục lưỡi Nut 1
8 VC-03-P08 Móc khoá tay cầm Hook 1
9 VC-03-P09 Chốt tay cầm Pin 2
10 VC-03-P10 Lò xo xoắn nhỏ Coil Spring (S) 1
11 VC-03-P11 Lò xo xoắn lớn Coil Spring (L) 1
12 VC-03-P12 Bạc lót Bushing 1
13 VC-03-P13 Chốt đàn hồi Ø4×20 mm Spring Pin (D4x20) 1
14 VC-03-P14 Vòng chặn chữ E, long đền E-Ring 2
15 VC-03-P15 Chốt đàn hồi Ø3×20 mm Spring Pin (D3x20) 1
16 VC-03-P16 Chốt đàn hồi Ø3×17 mm Spring Pin (D3x17) 1
17 VC-03-P17 Tem nhãn Sticker 1

Tiền tố VC-03-P thêm vào cho dễ phân biệt với phần khác. P viết tắt của chữ part, còn lại ta tuân theo đúng qui ước của bản vẽ.


Specifications

  • Áp dụng cho các loại ống: PVC, CPVC, PE, PP, PEX, ABS
  • Vận hành chỉ 1 tay, cán sơn tĩnh điện chống bám bẩn.
  • Lưỡi có thể thay thế dễ dàng sau nhiều lần cắt.
  • Khóa chuôi bằng khoen cài
  • Lưỡi cắt dự phòng là một phụ kiện mua riêng, không kèm theo kéo.
Optional Accessories
SKU Image Price VNĐ Product name & short description
VC-03-P01 Handle (Right) VC-03-P01 for MCC VC-03 PVC pipe cutter -
Handle (Right) VC-03-P01 for MCC VC-03 PVC pipe cutter
Handle (Right) VC-03-P01 is part No. 1 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses one piece. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan and i…
VC-03-P02 Handle (Left) VC-03-P02 for MCC VC-03 PVC pipe cutter -
Handle (Left) VC-03-P02 for MCC VC-03 PVC pipe cutter
Handle (Left) VC-03-P02 is part No. 2 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses one piece. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan and im…
VC-03-P04 Ratchet VC-03-P04 for MCC VC-03 PVC pipe cutter
€3.43
Ratchet VC-03-P04 for MCC VC-03 PVC pipe cutter
Ratchet VC-03-P04 is part No. 4 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses one piece. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan and imported…
VC-03-P05 Pawl VC-03-P05 for MCC VC-03 PVC pipe cutter
€5.02
Pawl VC-03-P05 for MCC VC-03 PVC pipe cutter
Pawl VC-03-P05 is part No. 5 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses one piece. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan and imported fr…
VC-03-P06 Bolt VC-03-P06 for MCC VC-03 PVC pipe cutter
€1.68
Bolt VC-03-P06 for MCC VC-03 PVC pipe cutter
Bolt VC-03-P06 is part No. 6 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses one piece. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan and imported fr…
VC-03-P07 Nut VC-03-P07 for MCC VC-03 PVC pipe cutter
€0.57
Nut VC-03-P07 for MCC VC-03 PVC pipe cutter
Nut VC-03-P07 is part No. 7 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses one piece. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan and imported fro…
VC-03-P08 Hook VC-03-P08 for MCC VC-03 PVC pipe cutter -
Hook VC-03-P08 for MCC VC-03 PVC pipe cutter
Hook VC-03-P08 is part No. 8 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses one piece. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan and imported fr…
VC-03-P09 Pin VC-03-P09 for MCC VC-03 PVC pipe cutter -
Pin VC-03-P09 for MCC VC-03 PVC pipe cutter
Pin VC-03-P09 is part No. 9 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses 2 pieces. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan and imported from…
VC-03-P10 Coil Spring (S) VC-03-P10 for MCC VC-03 PVC pipe cutter
€1.18
Coil Spring (S) VC-03-P10 for MCC VC-03 PVC pipe cutter
Coil Spring (S) VC-03-P10 is part No. 10 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses one piece. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan and…
VC-03-P11 Coil Spring (L) VC-03-P11 for MCC VC-03 PVC pipe cutter
€1.82
Coil Spring (L) VC-03-P11 for MCC VC-03 PVC pipe cutter
Coil Spring (L) VC-03-P11 is part No. 11 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses one piece. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan and…
VC-03-P12 Bushing VC-03-P12 for MCC VC-03 PVC pipe cutter -
Bushing VC-03-P12 for MCC VC-03 PVC pipe cutter
Bushing VC-03-P12 is part No. 12 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses one piece. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan and importe…
VC-03-P13 Spring Pin (D4x20) VC-03-P13 for MCC VC-03 PVC pipe cutter -
Spring Pin (D4x20) VC-03-P13 for MCC VC-03 PVC pipe cutter
Spring Pin (D4x20) VC-03-P13 is part No. 13 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses one piece. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan…
VC-03-P14 E-Ring VC-03-P14 for MCC VC-03 PVC pipe cutter -
E-Ring VC-03-P14 for MCC VC-03 PVC pipe cutter
E-Ring VC-03-P14 is part No. 14 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses 2 pieces. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan and imported…
VC-03-P15 Spring Pin (D3x20) VC-03-P15 for MCC VC-03 PVC pipe cutter -
Spring Pin (D3x20) VC-03-P15 for MCC VC-03 PVC pipe cutter
Spring Pin (D3x20) VC-03-P15 is part No. 15 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses one piece. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan…
VC-03-P16 Spring Pin (D3x17) VC-03-P16 for MCC VC-03 PVC pipe cutter -
Spring Pin (D3x17) VC-03-P16 for MCC VC-03 PVC pipe cutter
Spring Pin (D3x17) VC-03-P16 is part No. 16 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses one piece. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan…
VC-03-P17 Sticker VC-03-P17 for MCC VC-03 PVC pipe cutter -
Sticker VC-03-P17 for MCC VC-03 PVC pipe cutter
Sticker VC-03-P17 is part No. 17 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses one piece. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan and importe…

Product reviews

Based on 0 reviews
0.0
Overall
5★ 0
4★ 0
3★ 0
2★ 0
1★ 0

Be the first to review “Pipe cutter MCC VC-03, diameter from 27-63mm. MCC Japan”

🎁 Write a review to earn 20 reward points — photo +10, video +15.
Accumulate reward points to redeem unique gifts from Minh Khang Vinatools. Log in
Please log in to submit a review.
Recently viewed
No items yet