The REMS RAS Cu-INOX copper and stainless steel pipe cutter cuts pipes Ø3-35mm with a maximum wall thickness of 4mm. The telescopic spindle adjusts in two directions for fast, accurate operation, and the compact, sturdy design keeps the cut square. The REMS steel blade is durable and can be changed easily without auxiliary tools, with an integrated deburrer that smooths the pipe edge automatically after cutting.
REMS RAS Cu-INOX cuts copper and stainless steel tubes with a diameter of Ø3–35 mm and a wall thickness of up to 4 mm. The telescopic spindle allows quick adjustment in both directions, shortening the time needed to clamp the workpiece. Four hardened pressure rollers hold the tube in position throughout the cutting travel. As a result, the cut face stays square to the tube axis. The tool maintains its cutting performance across many work sessions.
The cutter body is compact, with a powder-coated alloy housing that limits dirt build-up and scratching. The metal handle is shaped to follow a natural grip, making it convenient to work in confined spaces. The cutter wheel is made of hardened REMS steel, replacement code 113210. The wheel axle uses a ball joint, so the wheel can be changed without any auxiliary tools. A deburrer that self-adjusts to the freshly cut tube end is built into the tool.
The long axial guide travel combined with four hardened pressure rollers keeps the tube stable while tightening. The telescopic spindle adjusts quickly in both the tightening and the releasing direction. Needle roller bearings on the spindle and the needle-bearing-mounted rollers reduce the hand force required for turning. Thin-walled tubes can be cut with little deformation at the cut end.
The compact design allows the cutter to be inserted into narrow gaps between already installed pipe runs. The metal body withstands impacts inside a tool box. The powder coating keeps the surface clean in contact with oil, grease and metal chips. The ergonomic handle distributes force evenly during many continuous turns.
The cutter wheel is made of hardened REMS steel and holds its profile over long periods when cutting thin stainless steel. The wheel axle uses a ball joint, so it can be removed and fitted quickly without tools. The deburrer is attached to the cutter body and self-adjusts to the workpiece edge. The deburring blade is hardened and ground smooth, for both inner and outer edges.
When the wheel is worn, simply order code 113210 for on-site replacement. Deburring immediately after cutting helps press or soldered joints fit more tightly. With soft copper tube, tighten in small increments after each turn. This method limits ovality of the cross-section and keeps the nominal diameter.
The cutter is used in the installation of domestic water systems, compressed air supply and refrigeration systems. Air-conditioning technicians cut copper tubes for outdoor and indoor units directly at the installation point. In the food and pharmaceutical sectors, the tool serves for cutting thin-walled stainless steel tubes. It also handles thin steel and aluminium tubes as well as brass tubes. Small mechanical workshops use it to prepare workpieces before pressing or soldering.
The REMS RAS Cu-INOX version suits both mobile maintenance work and on-site installation. Together with the replacement wheel 113210, code
| SKU | Image | Price VNĐ | Product name & short description | |
|---|---|---|---|---|
| 113210 R |
![]() |
€17.56
|
REMS 113210 R cutter wheel Cu-INOX 3-120, s 4
Cu-INOX 3-120, s 4: copper and stainless steel tubes, wall up to 4 mm, fits the REMS RAS Cu-INOX range. OD 19.70 mm, width 4.93 mm, bore 5.00 mm.
|










| SKU Code | Price (EUR) | Stock | |
|---|---|---|---|
| Loading variants... | |||
This website uses necessary cookies so the cart, sign-in and internal statistics work. If you agree, we turn on the Meta Pixel tool to improve our service quality. Privacy policy








