Replacement saw blade FELCO 602-3

The replacement saw blade FELCO 602-3 restores cutting efficiency when the original blade on a FELCO 602 pruning saw becomes dull or damaged. It measures 160 mm in length and 3 mm in thickness. The blade weighs 36 g, maintaining balance without adding excessive weight. Manufactured in South Korea, it meets FELCO specifications for fit and durability.

The tooth geometry cuts through fresh and seasoned wood with minimal binding. The 3 mm thickness resists flexing under load while reducing friction during the stroke. The blade locks into the positioning groove on the FELCO 602 frame, preventing lateral movement during use.

Technical construction of the FELCO 602-3 saw blade

Blade dimensions and weight

The blade spans 160 mm from mounting hole to tip. Thickness of 3 mm provides rigidity for cutting branches up to the saw's rated capacity. Net weight of 36 g keeps the tool balanced when installed. The steel alloy resists corrosion in humid environments.

• Blade length: 160 mm
• Thickness: 3 mm
• Net weight: 36 g
• Gross weight with packaging: 49.1 g
• UPC code: 783929406473

Teeth are precision-ground to match the original FELCO 602 blade profile. The mounting hole aligns with the pivot pin on the saw frame. Proper installation ensures the blade seats flush against the frame without gaps or wobble.

Material and finish

The blade uses alloy steel chosen for edge retention and rust resistance. Surface treatment protects against sap and moisture during field use. The finish reduces friction, allowing smoother cuts with less effort. Regular cleaning extends blade life between replacements.

• Material: alloy steel
• Corrosion-resistant finish
• Low-friction surface treatment
• Compatible with FELCO 602 pruning saw only

The blade is a genuine FELCO spare part, manufactured to the same tolerances as the original equipment. It is not compatible with other saw models or brands. Verify the model number before ordering to ensure correct fit.

Common applications for the replacement blade

This blade serves nurseries, orchards, parks, and urban forestry crews that rely on FELCO 602 saws for routine pruning. Replace the blade when teeth become dull, chipped, or when cutting speed declines noticeably. Professional arborists and landscape maintenance teams keep spare blades on hand to minimize downtime. Home gardeners with frequent pruning tasks also benefit from timely blade replacement.

Installation and maintenance guidance

Blade replacement procedure

Remove the retaining bolt on the FELCO 602 frame using the appropriate wrench. Slide the worn blade out of the positioning groove. Insert the new blade, aligning the mounting hole with the pivot pin. Tighten the bolt to the recommended torque to secure the blade without over-stressing the frame.

• Loosen and remove frame bolt
• Extract old blade from groove
• Align new blade hole with pivot pin
• Tighten bolt to specified torque
• Check blade alignment before first cut

After installation, test the blade on a small branch to confirm proper seating. The blade should move smoothly without lateral play. If the blade binds or rattles, recheck the bolt tension and alignment.

Care and storage

Wipe sap and sawdust from the blade after each work session using a dry cloth or soft brush. Store the saw in a dry location away from rain and corrosive chemicals. Avoid leaving the blade wet for extended periods. Periodic inspection helps identify wear before performance drops significantly.

• Clean blade after each use
• Store in dry environment
• Inspect teeth for chips or dullness
• Replace when cutting efficiency declines

Proper care maximizes the interval between replacements. The blade is designed for field maintenance, not resharpening. When performance degrades, install a new blade rather than attempting to restore the edge.

Technical reference data

The following specifications are drawn from the manufacturer's documentation and product labeling. All measurements are nominal values for quality control and ordering purposes.

• Net blade length: 160 mm
• Blade thickness: 3 mm
• Net weight: 36 g
• Packaged weight: 49.1 g
• UPC barcode: 783929406473
• Compatible model: FELCO 602 pruning saw
• Country of manufacture: South Korea

This blade is sold as a single unit. It does not include mounting hardware, which is retained from the original saw. Verify compatibility with your FELCO 602 model before purchase to ensure correct fit and function.