Telescopic drywall support

Product details

• Resilient up to a maximum of 3,500 N / 350 kg / 770 lbs when the telescopic rod is fully retracted
• Extremely stable construction due to highly durable steel pipes and non-slip TPU contact surfaces (9 x 7 cm)
• Single-handed operation thanks to 2-component plastic handle with pump mechanism
• Quick-slide button for rapid extension and retraction of the telescopic bar
• Controllable holding force by turning the support on the grip
• Application also on slopes due to continuously swivelling contact surfaces from -45° to +45°
• STE150, STE250, STE300, STE370: GS-certified for quality and safety
• Pipe system consisting of an inner pipe with a diameter of Ø28 mm and an outer pipe with a diameter of Ø32 mm

Product description

Extremely secure hold

The support guarantees a reliable and secure hold:

• due to robust design ensures a max load of 350 kg can be applied (dependent upon the size of support and length applied)
• due to rubber TPU contact surfaces top and bottom (9 x 7 cm)
• due to anti-slip system integrated in the grip

Quick and accurate handling

The support can be precisely set to requirements, and safely released:

• due to fixing in three steps: In order to pre-set the telescopic drywall support press the release button and extend the telescopic inner tube to the desired length. Fine adjustment takes place by pressing the pump lever until the system plate of the support lies against the workpiece. Then turn the grip clockwise until the desired holding force is attained (observe the max. load-bearing capacity)
• due to releasing in two steps: First turn the telescopic drywall support anti-clockwise. As soon as no further holding force is present, press the release button to retract the inner tube.

Areas of application

Carpentry and woodwork

Kitchen construction and shop fitting

• Staircase construction
• Shell construction
• Interior fittings
• Dry construction
• DIY
• Fixes and supports during dry construction
• Single-worker assembly

Safety information

Read and follow the instruction manual.

Material / Surface

Steel tube, coated

Handle made of 2-component plastic

• Lever made of reinforced PA6 plastic
• Contact surfaces of the pressure plates made of TPU plastic

Care instructions

Check the product regularly, at least after ten uses, for damage and proper functioning of all moving parts.

Do not use a damaged product.

• If the rotation function of the pressure plates is impaired, lubricate the thread of the threaded bolt with a commercially available lubricant.

Accessories / Suitable for

• Multi-function/laser fixture STE-LH | Accessory with 1/4" thread for holding a laser, camera etc - Can be used without tools on round (0-45 mm) and angular (0-55 mm) support parts such as drywall supports, profiles, ladders - L-shaped rotating fixture with 2 rotation axes: 360° next to fixing clamp, 180° at threaded connection | https://vinatools.com/static/bessey-mirror/pages/multi-functionlaser-fixture-ste-lh-c9c2693465.html
• Ceiling tripod attachment STE-DS | Accessory for drywall supports with an outer diameter of the telescopic inner tube of 25 mm and 28 mm - For increasing the support surface - Even pressure thanks to the three-winged contact surfaces | https://vinatools.com/static/bessey-mirror/pages/ceiling-tripod-attachment-ste-ds-fdcb401fde.html
• Large multifunction fixture STE-MH-SET | Accessory for BESSEY telescopic supports STE (outer diameter 32 mm) and ST (outer diameter 29 mm) - Fixture for the temporary assembly of partition walls and storage surfaces, e.g. tables, shelves - Thanks to the 1/4" thread, also suitable for tools such as lasers (e.g. Stabila LAX 600G, Bosch GLL 3-80 CG), cameras and construction lights | https://vinatools.com/static/bessey-mirror/pages/large-multifunction-fixture-ste-mh-set-bbfb78e850.html
• Combi-bag STE-BAG | For convenient transport and protected storage of two BESSEY drywall supports STE300, STE370 and ST290 as well as accessories - Comfortable thanks to the padded shoulder strap and the possibility to adjust the length of the bag to the drywall supports to be placed within - Easy to use due to the long zip-up case and four exterior pockets for additional storage space | https://vinatools.com/static/bessey-mirror/pages/combi-bag-ste-bag-7f6b44c072.html
• Cross connector STE-CC-SET | Accessory for telescopic supports with an outer tube diameter of 20 mm to 34 mm - Can be used for fastening cross connections, such as tubes, and as a temporary suspension option, e.g. for lamps, bicycles, etc. - 360° flexible pre-positioning, which is held securely thanks to the 16-step latching mechanism | https://vinatools.com/static/bessey-mirror/pages/cross-connector-ste-cc-set-e8370bf953.html
• STE-SP35 support plate | Light aluminium profile with non-slip cellular rubber - For increasing the support surface of BESSEY drywall supports ST (only in conjunction with replacement contact surface 3101952) and STE - Application also on slopes due to continuously swivelling contact surfaces from -45° to +45° | https://vinatools.com/static/bessey-mirror/pages/ste-sp35-support-plate-80d2d94926.html
• Construction tripod STE-BS | Accessory for drywall supports with an outer pipe diameter of 29 mm and 32 mm - Stable stand as the force of the braced drywall support acts downwards in places - Drywall supports can even be placed freely in the room without a top bracing and can therefore also be used outdoors | https://vinatools.com/static/bessey-mirror/pages/construction-tripod-ste-bs-c3f7494317.html
• Small construction tripod STE-KBS | Accessory for STE55 telescopic support - Accessory for STE90 telescopic support as a smaller, space-saving alternative to the larger construction tripod STE-BS - Telescopic support can be positioned upright even when untensioned and pre-positioning is made easier | https://vinatools.com/static/bessey-mirror/pages/small-construction-tripod-ste-kbs-a177d4d020.html