Wood chisel set DIN 5139 Kirschen 1118 SB 6-26 mm

Name: Wood chisel set DIN 5139 Kirschen 1118 SB 6-26 mm
Brand: Kirschen
SKU: 1118000
Price: 8132000.0 VND
Availability: InStock

★ 0.0 (0 reviews)

Sold: 1

Imported from: Germany

Origin: Made in Germany

Six bevel-edged chisels cover 6, 10, 12, 16, 20 and 26 mm in one carton box. Blades are made from high-speed steel and ground by hand across the full face. Each handle is moulded in solid hard plastic with an oval section and anti-slip rings. The set meets DIN 5139 and is made in Germany.

SKU: 1118000

€272.55

Stock status: 4

Indicative price

Description

A wood chisel set DIN 5139 with six bevel-edged blades covers the sizes 6, 10, 12, 16, 20 and 26 mm. The Kirschen 1118 SB is supplied in a carton box and is made in Germany. Blades are produced from high-speed steel and ground by hand over the full face. The bevelled sides let the blade reach into dovetail joints without fouling the shoulders.

Every handle is moulded in one piece from hard plastic and shaped to the hand. The oval cross section keeps the cutting edge aligned during paring cuts. Moulded rings on the grip reduce slipping when the hand is damp. The six-size range suits both fine joinery and coarser stock removal. Cabinetmakers, carpenters, model makers and maintenance workshops can use one box for most mortise and rebate work.

Wood chisel set DIN 5139 with six bevel-edged blades

Blade construction and steel

The cutting parts are forged from high-speed steel, then ground by hand across the whole blade face. Hand grinding gives a flat back and a clean, even bevel that is easy to re-hone on a stone. The side bevels run along the full length of the blade. This profile lets the chisel enter dovetail sockets and narrow corners where a square-sided blade would bind.

Blade material: high-speed steel
Full hand grinding over the complete blade face
Bevel-edged sides for dovetail and corner work
Six widths: 6, 10, 12, 16, 20 and 26 mm
Conforms to DIN 5139

The width range spans fine joinery and general carpentry. The 6 and 10 mm blades clean small mortises and inlay recesses. The 12 and 16 mm sizes handle hinge gains and tenon shoulders. The 20 and 26 mm blades pare wide surfaces and level glue lines. Keeping all six in one box avoids switching between separate tools during a job.

Handle and grip

Each blade sits in a single-piece hard plastic handle moulded directly to the tang. The shape follows the hand, so the tool stays steady during push cuts. The oval section stops the chisel from rolling on the bench and helps the user feel the edge orientation. Moulded rings around the grip give a defined hold when hands are dusty or damp.

Solid moulded hard plastic handle
Hand-shaped contour for push and paring cuts
Oval grip cross section
Anti-slip rings on the handle body

The handle material tolerates workshop conditions such as glue, sawdust and moisture better than untreated wood. Because the grip is moulded as one piece, there is no ferrule joint to loosen over time. The set arrives in a carton box measuring 350 x 210 x 40 mm, with a total weight of 1150 g, so it can be stored flat in a tool chest drawer.

Common applications

Typical tasks include cutting and cleaning mortises, trimming tenon shoulders and paring dovetail sockets. Joiners use the narrow blades for hinge and lock recesses in doors and window frames. Cabinetmakers rely on the wider sizes to level glue squeeze-out and flush proud joints. Model makers and pattern shops use the set for detail work in solid timber. Maintenance teams keep it for on-site fitting of wooden fixtures and furniture repair.

Catalogue data

Catalogue reference 1118 SB lists six chisels supplied in a carton box. The stated blade sizes are 6, 10, 12, 16, 20 and 26 mm. Blade steel is high-speed steel with full hand grinding, and the geometry follows DIN 5139. The handle is described as solid moulded hard plastic with an oval section and anti-slip rings. Box dimensions are 350 x 210 x 40 mm and the set weighs 1150 g.

Specifications

Set content: 6 wood chisels
Blade widths: 6, 10, 12, 16, 20, 26 mm
Blade material: high-speed steel
Finishing: full hand grinding over the complete blade face
Blade geometry: bevel-edged sides for dovetail work
Standard: DIN 5139
Handle: single-piece moulded hard plastic, hand-shaped contour
Handle section: oval, with anti-slip rings
Packaging: carton box, 350 x 210 x 40 mm
Total weight: 1150 g

Tags / Keywords: wood chisel set , bevel edge chisel , woodworking chisels , chisel set 6 pieces , carpentry hand tools , plastic handle chisel , dovetail chisel , joinery hand tools , cabinet making chisel , mortise chisel , german wood chisels , hand tools for woodworking