Wood chisel

Wood Carving Chisel Kirschen 31760 Sweep 6 Gouge

★ 0.0 (0 reviews)

Sold: 0

Imported from: Germany

Origin: Made in Germany

The Kirschen 31760 wood carving chisel features a sweep 6 profile for moderate curves, ideal for varied carving tasks. Its tool steel blade is hardened to 61 HRC with a 17° bevel for lasting sharpness. The octagonal hornbeam handle prevents rolling. At 245 mm total length with a 25 mm handle height, it offers control and comfort for detail and broader work.

SKU: 31760-

10 variants

€85.16 - €117.18

Stock status: Varies by SKU

Indicative price

Price list & Ordering

Drag to reorder

	SKU Code	Price (EUR)	Weight	Width
⋮⋮	3176002	€85.16	64g	2 mm
⋮⋮	3176004	€85.16	65g	4 mm
⋮⋮	3176006	€85.16	85g	6 mm
⋮⋮	3176008	€85.16	85g	8 mm
⋮⋮	3176010	€85.16	78g	10 mm
⋮⋮	3176012	€91.61	92g	12 mm
⋮⋮	3176014	€91.61	81g	14 mm
⋮⋮	3176016	€108.62	116g	16 mm
⋮⋮	3176018	€110.80	105g	18 g
⋮⋮	3176020	€117.18	115g	20 mm

Description

The Kirschen 31760 wood carving chisel is designed for work requiring moderate curves, featuring a sweep 6 profile. Its blade is made from hardened tool steel at 61 HRC and ground to a 17° bevel angle. Each blade arrives pre-sharpened, allowing you to begin carving immediately. The tool measures 245 mm in total length, with a handle height of 25 mm.

The handle is crafted from natural hornbeam and shaped with an octagonal cross-section, preventing the gouge from rolling off sloped surfaces. A metal ferrule reinforces the tang area, providing durability when struck with a mallet. The Kirschen 31760 is available in multiple blade widths, making it suitable for both fine detailing and broader sweeps. Carvers can use the tool with hand pressure or a wooden mallet, depending on the material. Manufactured in Germany.

Kirschen 31760 Wood Carving Chisel: Blade, Handle, and Geometry

Blade and Cutting Geometry

The blade's 61 HRC hardness ensures the cutting edge remains sharp through extended carving sessions. The 17° bevel offers a balance between sharpness and edge durability, minimizing chipping in dense woods. The sweep 6 profile provides a moderate curve, ideal for flutes, hollows, and rounded ornamentation. Factory-ground blades typically require resharpening only after significant use.

Sweep 6 carving gouge with curved profile
Hardened tool steel blade, 61 HRC
17° bevel angle
Blade supplied pre-sharpened
Total length: 245 mm

The curved profile is ideal for relief carving where a flat chisel would leave facets. When pushed by hand, the gouge allows for controlled shavings across the grain. When struck with a mallet, it efficiently removes waste in deeper hollows. Sharpening with a natural Arkansas stone restores the 17° bevel without excessive steel removal. Maintaining a consistent bevel ensures the tool registers accurately on the workpiece.

Handle and Construction

Hornbeam is a dense hardwood that absorbs shock from mallet blows. The octagonal cross-section provides a secure grip and allows users to sense blade orientation by touch. A metal ferrule at the front of the handle resists splitting from repeated impacts. The 25 mm handle height keeps the tool compact for precise, close-up work.

Natural hornbeam handle
Octagonal section prevents rolling
Metal ferrule protects against tang splitting
Handle height: 25 mm
Suitable for hand or mallet use

Wooden handles transmit less vibration than plastic, reducing hand fatigue during long sessions. The flat sections also make it easy to pick up the gouge in the correct orientation. The family includes several blade widths, listed in the variant table. Narrow blades are ideal for fine ornamentation, while wider blades clear larger areas efficiently.

Common Applications

The sweep 6 gouge is used for cutting decorative grooves, flowing curves, and shaped details in carved work. Furniture makers use it on chair backs, moldings, and carved panels. Picture frame makers rely on it for repeating ornament along rails. Sculptors use narrow widths for small forms and wider widths for larger hollows. The geometry is effective in oak, walnut, pine, and ironwood. Restoration workshops use it to recut damaged ornament on antique pieces.

Care and Storage

Wipe chips and dust from the blade after each session. Resharpen when cutting becomes difficult or the surface loses crispness. Store the gouge in a dry place and keep the edge away from hard metal. A roll-up leather pouch can protect multiple chisels. Occasionally oil the hornbeam handle to maintain wood stability.

Specifications

Sweep 6 carving gouge with curved blade profile
Hardened tool steel blade, 61 HRC
Bevel angle: 17°
Blade supplied pre-sharpened, ready for use
Total length: 245 mm
Handle material: natural hornbeam
Octagonal handle section, anti-roll on flat surfaces
Handle height: 25 mm
Metal ferrule resists tang splitting under mallet blows
Usable by hand pressure or with a wooden mallet
Suitable for oak, walnut, pine, and ironwood

Tags / Keywords: wood carving chisel , carving gouge , sweep 6 gouge , curved carving chisel , woodworking chisel , hornbeam handle chisel , wood sculpting tools , furniture carving tools , chisel for hardwood , gouge for decorative grooves , professional carving tools , carpentry hand tools

Related products