K Body REVO

Product details

• Clamping force up to 8,000 N
• Very large parallel clamping surfaces with 3 removable pressure caps
• Metal-reinforced plastic housing and optimised sliding arm with double slide protection for more power and safety: The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition
• Can be converted without tools for spreading tasks
• High-quality 2-component symmetrical plastic handle with hexagon socket for the comfortable application of the clamping force (max. torque 17 Nm)

Product description

Precise and gentle

Workpieces with sensitive surfaces can be clamped and spread exactly parallel to each other – even behind and on the side of the rail. Corners and recessed edges as well as pointed and round surfaces can also be perfectly aligned:

• due to extremely large clamping surfaces that are attached perpendicular to the rail
• due to three removable pressure caps that are repellent to glue, and also resistant to paint and grease solvents
• due to workpiece supports that prevent the workpiece from coming into contact with the rail

Powerful and safe

They securely clamp with a clamping force of up to 8,000 N:

• due to the metal-reinforced plastic housing
• due to the optimised sliding arm with double slide protection: It holds the clamp reliably with the set clamping force and prevents any unintentional slipping of the sliding arm in the unclamped condition

Versatile and well thought out

The clamps provide an enormous number of possible applications:

• due to ingenious accessories, such as tilting adapter, frame press set, clamp extension and table clamp
• the ergonomically formed 2-component symmetrical plastic handle with hexagon socket means the clamping force can be comfortably applied (max. torque 17 Nm)
• the continuously adjustable head for the KREV Vario version enables the clamp to be positioned in the middle of the workpiece for optimum weight distribution

Areas of application

Cabinet Making

Hardwood Glue-ups

• Door and Window Assembly
• Woodworking Jigs and Fixtures
• Furniture Building
• Home Renovation Projects

Safety information

Use the product only in its original condition.

Use the product only for its intended purpose. Improper use can cause personal injury or property damage.

• Wear safety glasses to protect your eyes.
• Wear work or assembly gloves to protect your hands.
• Wear safety footwear to protect your feet.
• Thew handle must always be free of oil and grease to prevent slipping.
• Keep the product out of reach of children.
• Small parts must not be swallowed or inserted into body openings.
• Check the product for damage before each use and make sure that all moving parts are working properly.
• A damaged product must not be used.
• Follow the care instructions for each product – see vinatools.com.
• Use only original BESSEY spare parts
• The clamping tool must not be used for lifting, pulling or leaning.
• The clamping tool must not be used to secure cargo during transportation.
• The clamping tool may only be tightened by hand without any additional aids.
• The clamping tool must not be used for permanent installation.
• Regularly check that the end stop is working properly when using clamps.

Material / Surface

Upper and lower section made of reinforced PA6 plastic with inserted sheet metal parts for reinforcement

Hollow profile rail made of steel, cold-drawn, galvanised

• Spindle with trapezoidal thread in rolled steel, burnished
• Handle made of 2-component plastic
• Pressure plate made of steel, cold pressed, galvanised
• Protective caps made of plastic

Care instructions

Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).

Clean the rails with solvent.

• Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
• Clean the fluting on the rails with a steel brush.
• Clean and oil the spindle regularly.
• If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only).

Accessories / Suitable for

• K Body Extender KBX | Connect any two K Body parallel clamps to increase the clamping capacity. The connector is made of robust aluminum. | https://vinatools.com/static/bessey-mirror/pages/k-body-extender-kbx-027deb2f3b.html
• Variable jaw KRE-VO | Steplessly adjustable and fixable upper section for improved workpiece positioning - Very large parallel clamping surfaces - With 2 pressure caps to protect delicate surfaces | https://vinatools.com/static/bessey-mirror/pages/variable-jaw-kre-vo-7b6832204f.html
• Edge clamp KT5 | Practical accessory for clamping edges and difficult to reach areas - Suitable for conventional screw clamps with a max. rail thickness of 13 mm | https://vinatools.com/static/bessey-mirror/pages/edge-clamp-kt5-7779b5d166.html
• Framing set KP | KP Framing System (from 30 cm to 250 cm/12"–98") with four 90° KP Blocks - Separately adjustable clamping force with 2 inserted clamps per corner - Lightweight / easy to assemble | https://vinatools.com/static/bessey-mirror/pages/framing-set-kp-ac36f6bf04.html
• Table clamp TK6, RB269, LM10/5R8 | Especially for DIY applications and domestic appliances - Special accessory for angle clamps WS 3/WS 6, screw clamp S 10 and K Body REVO parallel clamps KRE/KREV and KR/KRV to hold them to a work surface edge | https://vinatools.com/static/bessey-mirror/pages/table-clamp-tk6-rb269-lm105r8-23e6040a46.html
• Tilting K Body clamp adapter KR-AS | Adapter with tilting clamping jaws with a tilt range of -15° to +15° - Clamping on sloping and parallel surfaces | https://vinatools.com/static/bessey-mirror/pages/tilting-k-body-clamp-adapter-kr-as-ff0ffda0de.html