Hotline: 096 779 3398 Email: [email protected]
Multi-Purpose Spray

Multi-purpose spray Type 5 PRO Viton, 6.5 litre capacity

★ 0.0 (0 reviews)
Sold: 2
Views: 0
Imported from: Italy
Origin: Made in Italy

Holding 6500 ml in total and 4875 ml of working volume, this hand-pump sprayer handles car wash foam and cleaning chemicals. The Viton gasket resists heat and aggressive solutions, keeping the seal tight under pressure. A safety valve releases pressure automatically above 3 bar. The translucent body shows the fill level, and the wide base keeps the tank upright.

SKU: 21688
€92.88
Stock status: Out of stock
Indicative price
Description

A chemical pressure sprayer 6.5 litre in tank size, the EPOCA Type 5 PRO Viton stores 4875 ml of usable solution per filling. Pressure is built by hand pump and capped at 3 bar. The detachable spray handle and plastic lance direct the jet where the operator needs it. A translucent natural-coloured body keeps the remaining liquid visible during work.

The sealing set uses Viton, a synthetic rubber with good resistance to heat, chemicals and pressure. That seal limits leakage around the head and supports steady output while the tank is pressurised. A safety valve vents automatically once internal pressure passes 3 bar. The base is broad, so the tank stays stable on a workshop floor or a wash bay. The unit is made by EPOCA in Italy.

Chemical pressure sprayer 6.5 litre EPOCA Type 5 PRO Viton

The model combines a large reservoir with a simple manual pressure system, which suits car care work and routine cleaning. Operators refill less often because the working volume reaches 4875 ml. All wetted sealing parts rely on Viton rather than standard rubber.

Tank and working capacity

Total tank volume is 6500 ml, while the declared working volume is 4875 ml. The gap leaves an air chamber for pumping, so pressure can build without overfilling. The clear body lets the user read the liquid level without opening the head. A stable foot ring reduces the risk of the tank tipping when it is set down on a sloped or wet floor.

  • Total capacity: 6500 ml
  • Working capacity: 4875 ml
  • Body colour: natural translucent
  • Base: wide standing foot for upright placement
  • Supplied with plastic spray lance

A filled tank stays within a volume one person can carry and pump by hand. Because the level is visible, chemical dosing is easier to follow across repeated jobs. Refilling through the wide head opening is straightforward when the tank is depressurised first through the safety valve.

Viton sealing and safety valve

The gasket set is made of Viton, chosen for its behaviour against heat, chemicals and pressure. A tight seal keeps the pressurised air inside the tank, so spray output remains even until pressure drops. The safety valve is a second control: it vents air when internal pressure exceeds 3 bar, which keeps the tank within its rated working range.

  • Gasket material: Viton
  • Safety valve: fitted, automatic release above 3 bar
  • Maximum working pressure: 3 bar
  • Detachable spray handle for easier handling
  • Head sealing designed against leakage under pressure

Before opening the tank, release the remaining pressure through the valve. Rinse the tank and lance after using aggressive detergents to protect the seals and the nozzle. Check the gasket periodically for cuts or swelling, and replace it when sealing is no longer tight.

Common applications

Typical uses cover vehicle care and general cleaning tasks. The sprayer applies car shampoo, snow foam pre-wash, wheel cleaner and degreaser onto body panels, rims and engine bays. Detailing shops, service centres and fleet garages use it for pre-wash coverage before pressure washing. It also serves facility cleaning, such as spraying disinfectant or detergent on floors, tiled walls, racks and equipment surfaces.

Catalogue reference

The catalogue entry lists the tank under the Type 5 PRO Viton line. It has a 6500 ml total volume and 4875 ml working volume. It features a Viton gasket and a fitted safety valve. Maximum pressure is 3 bar. The body is described as natural translucent. Production is by EPOCA in Italy.


Specifications

  • Total tank capacity: 6500 ml
  • Working capacity: 4875 ml
  • Maximum working pressure: 3 bar
  • Gasket material: Viton
  • Safety valve: fitted, automatic pressure release above 3 bar
  • Pressurisation: manual hand pump
  • Spray handle: detachable
  • Accessory supplied: plastic spray lance
  • Body colour: natural translucent
  • Base: wide standing foot

Product reviews

Based on 0 reviews
0.0
Overall
5★ 0
4★ 0
3★ 0
2★ 0
1★ 0

Be the first to review “Multi-purpose spray Type 5 PRO Viton, 6.5 litre capacity”

🎁 Write a review to earn 20 reward points — photo +10, video +15.
Accumulate reward points to redeem unique gifts from Minh Khang Vinatools. Log in
Please log in to submit a review.
Recently viewed
No items yet