Hotline: 096 779 3398 Email: [email protected]
Copper and stainless steel pipe cutters

Pipe deburring tool REMS REG St, for pipes with diameter from ¼-2

★ 0.0 (0 reviews)
Sold: 0
Views: 0
Imported from: Germany
Origin: Made in Germany
Deburring cutter head for internal pipe edges, for pipes with a diameter from Ø1/4 inch to Ø2 inch. The shank is compatible with REMS Amigo electric hand-held threading machines. Genuine REMS accessory, practical for cleaning pipe edges.
SKU: 731700
€219.06
Stock status: Backorder 4-8 weeks
Indicative price
Description

The REMS REG St pipe deburring tool, article number 731700, is made from high-quality stainless steel. It offers high durability and effective wear resistance. Its dimensions suit deburring work on pipes from ¼″ to 2″. After thread cutting, simply fit the tool into the clamping head on the machine and start at low speed. Rotate the tool evenly along the pipe edge to remove rough burrs on the inside and outside. Once finished, the pipe surface is smooth, supporting a tight threaded connection and a high level of safety.

Pipe deburring tool REMS REG St, for pipes with diameter from ¼ – 2.

The REMS REG St pipe deburring tool is compatible with the REMS Amigo, Amigo E, Amigo 2 and Amigo 22 V threading machines. When the correct accessory number 731700 is fitted, the connection allows fast, stable operation and saves on investment cost.

  • Material: stainless steel St
  • Compatible pipes: ¼″–2″
  • Removes burrs on the inside and outside of the pipe
  • Non-slip handle for precise operation
  • Compatible with Amigo, Amigo E, Amigo 2 and Amigo 22 V
  • Quick tool change thanks to a clearly marked accessory number
  • Article number: 731700

With the REMS REG St pipe deburring tool, cleaning off rough burrs becomes straightforward. The tool optimises water and air flow and reduces the risk of blockages caused by metal chips. Little preparation is required; a single simple operation leaves the pipe ready for the next threading step.


Specifications

Pipe deburring tool REMS REG St, internal edge, for pipes with a diameter from Ø1/4 inch to Ø2 inch. The shank is compatible with electric hand-held threading machines. A practical accessory for cleaning pipe edges after cutting with a pipe cutter.
For use with metal, steel, copper, stainless steel and plastic pipes. Designed with 2 joined cone-shaped blades and chip discharge grooves. The pointed tip of the deburring cutter also allows use on pipes with small diameters.

Product reviews

Based on 0 reviews
0.0
Overall
5★ 0
4★ 0
3★ 0
2★ 0
1★ 0

Be the first to review “Pipe deburring tool REMS REG St, for pipes with diameter from ¼-2”

🎁 Write a review to earn 20 reward points — photo +10, video +15.
Accumulate reward points to redeem unique gifts from Minh Khang Vinatools. Log in
Please log in to submit a review.
Recently viewed
No items yet