The REMS RAS Cu copper pipe cutter, article 113370 R, cuts pipes from 8 to 42 mm in diameter, that is 3/8 to 1 5/8 inch. The cutter is used for copper pipes. The cutting wheel runs around the pipe, tightening a little more with each turn until the pipe is severed. Genuine REMS item.
The REMS RAS Cu copper pipe cutter, article number 113370 R, is a hand-held pipe cutter from REMS. It cuts pipes with an outside diameter from 8 to 42 mm, that is 3/8 to 1 5/8 inch. The manufacturer states that the cutter is used for copper pipes. The cutting wheel presses against the pipe wall, the cutter is rotated around the pipe and tightened a little further with each turn. This cutting method produces an even, round cut edge without deforming the pipe.

The support rollers keep the pipe centred throughout the cutting process. The spindle on the handle adjusts the opening width to the pipe size. The cutting wheel can be replaced when worn. The cutter can be kept in the installer's tool box and in the service vehicle. It suits air conditioning installers, plumbers and electromechanical technicians.
Clamp lightly, rotate one full turn, then tighten a little at a time rather than applying full pressure at once. Hold the cutter perpendicular to the pipe so the cut does not run off at an angle. Wipe chips and metal dust off the cutting wheel after use. Apply a little oil to the spindle and rollers, and store the cutter in a dry place. The manufacturer's EAN code is 4039976020831.














| SKU Code | Price (EUR) | Stock | |
|---|---|---|---|
| Loading variants... | |||
This website uses necessary cookies so the cart, sign-in and internal statistics work. If you agree, we turn on the Meta Pixel tool to improve our service quality. Privacy policy
