Wood chisel

Wood carving chisel Kirschen 31780, 61 HRC blade

★ 0.0 (0 reviews)

Sold: 0

Imported from: Germany

Origin: Made in Germany

Octagonal shank and straight cutting edge give this sculptor's chisel steady control under mallet blows. The blade reaches 61 HRC and carries a 17° bevel, suited to soft and hard timber. A white beech handle keeps the grip comfortable through long carving sessions. Total length measures 245 mm, with a height of 25 mm. Made in Germany by Kirschen.

SKU: 31780-

10 variants

€83.57 - €114.99

Stock status: Varies by SKU

Indicative price

Description

Wood carving chisel work calls for a blade that holds its edge under mallet impact. The Kirschen 31780 answers that with steel hardened to 61 HRC. The straight cutting edge sits on an octagonal shank, which resists rolling on the bench. The bevel is ground to 17° at the factory, ready for soft and hard timber alike.

A white beech handle carries force from the hand or mallet into the blade. The surface is smoothed, so long carving sessions stay comfortable. Total length is 245 mm and the height is 25 mm. Ten cutting widths run from 2 mm up to 20 mm. Carvers can move from fine detail to broader clearing cuts within one family. Every chisel in the range is made in Germany.

Wood carving chisel Kirschen 31780 in daily shop use

The octagonal shank adds flat faces that seat against the palm and against the mallet. That geometry limits slipping and keeps the cutting line predictable. Hardness at 61 HRC supports edge retention between sharpenings. The straight edge suits outlining, grounding and clean-up passes where a gouge would leave scoop marks.

Construction and materials

Steel, geometry and handle are matched to repeated mallet work. The hardened blade takes impact without the edge folding quickly. The eight-sided shank increases contact area and reduces twisting during a cut. White beech was chosen for the handle because it machines smooth and withstands sustained striking. The pre-set bevel lets the carver start work with light honing only.

Blade hardness: 61 HRC
Bevel angle: 17°
Cutting edge: straight
Shank: octagonal section
Handle: white beech

Keep the bevel at its original angle when honing, so the cutting behaviour stays consistent. A fine natural stone, such as an Arkansas stone, is a common choice for refreshing the edge. Wipe the blade dry after use and store it in a tool roll. Separate pockets stop edges from knocking against each other.

Dimensions and handling

Length and mass are balanced so the chisel stays controllable during detail passes. Total length is 245 mm, which gives room for two-hand guidance behind the edge. Height measures 25 mm. The ten cutting widths in the family cover narrow veining through to wider clearing cuts. Pick the width that matches the smallest radius in the pattern you are cutting.

Total length: 245 mm
Height: 25 mm
Ten cutting widths within the range
Single-piece handle and blade assembly per chisel
Unit of sale: piece

Narrow widths work well for lettering and fine ornament. Wider widths remove background material faster on relief panels. Many carvers build a set gradually, adding widths as patterns demand them. A leather tool roll with twelve pockets keeps a working set organised and protects the edges in transit.

Common applications

Ornamental carving, relief panels and decorative detail work are the main tasks for this chisel. Craft workshops use it to cut crisp outlines before clearing waste with gouges. Furniture restorers rely on the straight edge to match original mouldings and repair damaged carving. Vocational schools include octagonal sculptor's chisels in basic carving kits. The narrow widths reach into tight corners where larger tools cannot be controlled. Model makers and sign carvers also use the range for lettering.

Manufacture and reference data

The 31780 series is produced in Germany by Kirschen. Controls cover steel treatment, hardening, surface finishing and handle fitting. The range is listed under HS code 82053000 for import and distribution. Catalogue naming follows the German description Blumeneisen with white beech handle, stated by cutting width.

Specifications

Tool type: sculptor's carving chisel, straight cutting edge
Blade hardness: 61 HRC
Bevel angle: 17°
Shank form: octagonal
Handle material: white beech
Total length: 245 mm
Height: 25 mm
Use: ornamental and relief wood carving, hand or mallet driven

Tags / Keywords: wood carving chisel , sculptor carving chisel , wood carving hand tools , octagonal shank chisel , straight edge carving chisel , beech handle chisel , relief carving tools , detail carving chisel , mallet carving chisel , woodworking chisel for carvers , ornamental wood carving tool , wood sculpture tools

Price list & Ordering

Drag to reorder

	SKU Code	Price (EUR)	Weight	Width
⋮⋮	3178002	€83.57	58 g	2 mm
⋮⋮	3178004	€83.57	75 g	4 mm
⋮⋮	3178006	€83.57	74 g	6 mm
⋮⋮	3178008	€83.57	76 g	8 mm
⋮⋮	3178010	€83.57	86 g	10 mm
⋮⋮	3178012	€89.89	94 g	12 mm
⋮⋮	3178014	€89.89	119 g	14 mm
⋮⋮	3178016	€106.59	120 g	16 mm
⋮⋮	3178018	€108.73	107 g	18 mm
⋮⋮	3178020	€114.99	129 g	20 mm