Handle (Left) VC-03-P02 is part No. 2 of the MCC VC-03 PVC pipe cutter drawing. It fits the four sizes cutting pipe up to 27, 34, 42 and 48 mm. Each cutter uses one piece. Replacing only the failed part keeps the cutter in service. Made by MCC in Japan and imported from Japan.
Handle (Left) VC-03-P02 is part No. 2 in the parts drawing of the MCC VC-03 PVC pipe cutter range. It fits the four cutter sizes with cutting capacity up to 27, 34, 42 and 48 mm. Each cutter uses one piece. It is the lower body of the cutter, squeezed against the right handle. Per the drawing, two pins (No. 9) pass through its head and are held by two E-rings (No. 14); the small coil spring (No. 10) sits at the head and spring pin No. 16 near the tail. Replace only the worn, broken or lost part with VC-03-P02 and keep using the cutter. The blade is position No. 3, sold separately per cutter size as VCE0327 to VCE0348. Made by MCC in Japan and imported from Japan. When ordering, quote VC-03-P02 together with the cutter model.
It is the lower body of the cutter, squeezed against the right handle. Per the drawing, two pins (No. 9) pass through its head and are held by two E-rings (No. 14); the small coil spring (No. 10) sits at the head and spring pin No. 16 near the tail.
VC-03-P02 follows position No. 2 on the common drawing of the four cutter sizes.
| Cutter | Cuts pipe up to | Spare blade |
| VC-0327 | 27 mm | VCE0327 |
| VC-0334 | 34 mm | VCE0334 |
| VC-0342 | 42 mm | VCE0342 |
| VC-0348 | 48 mm | VCE0348 |










| SKU Code | Price (EUR) | Stock | |
|---|---|---|---|
| Loading variants... | |||
