Anvil bypass lopper FELCO 231 40 mm 800 mm

The FELCO 231 anvil bypass lopper cuts dry branches up to 40 mm in diameter. Its gear mechanism delivers 65 percent more cutting force than conventional models. The tool measures 800 mm in total length and weighs 1.15 kg. Aluminium alloy handles reduce fatigue during extended pruning sessions. The hollow-ground blade penetrates dense wood cleanly.

An anvil cutting system uses a sharp blade and a flat support surface. The blade presses the branch against the anvil to complete the cut. This design suits dry, dead wood where crushing is acceptable. The curved anvil holds the branch in place throughout the stroke. Slippage is minimized even when cutting at awkward angles.

Anvil Bypass Lopper 40 mm Cutting Mechanism

Gear-driven force multiplication

The integrated gear system amplifies user input by 65 percent. Less hand pressure is required to sever thick branches. The mechanism distributes load evenly across the pivot points. Hardened steel gears resist wear under repeated high-stress cuts. This feature is particularly useful when working with dense hardwoods or fibrous species.

• Gear ratio increases cutting force by 65 percent
• Hollow-ground blade for reduced friction
• Curved anvil holds branch securely
• Maximum cutting diameter: 40 mm
• Blade material: hardened steel

The hollow-ground blade profile tapers from spine to edge. This geometry reduces drag as the blade enters the wood. Cuts remain clean with minimal tearing of bark or cambium. The blade can be resharpened using standard files or sharpening stones.

Aluminium alloy handle construction

Handles are extruded from lightweight aluminium alloy. Total tool weight is kept to 1.15 kg despite the 800 mm length. The alloy resists corrosion in humid orchard environments. Ergonomic grips are covered with a non-slip coating free of phthalates. Cushioned bumpers absorb shock at the end of each cutting stroke.

• Handle material: aluminium alloy
• Total length: 800 mm
• Weight: 1.15 kg
• Non-slip grip coating, phthalate-free
• Shock-absorbing bumpers at handle ends

The extended reach allows pruning of high branches without ladders. Leverage is maximized by the long handle arms. Users can apply force comfortably at waist height rather than overhead. The lightweight construction reduces arm strain during repetitive cuts.

Common Applications

This lopper is suited to orchards, vineyards, and large gardens where dry wood must be removed. It handles dormant-season pruning of fruit trees and ornamental shrubs. The anvil mechanism works well on dead branches that would splinter under bypass blades. Forestry workers use it to clear undergrowth and trim saplings. Landscape maintenance crews rely on it for renovation pruning of overgrown hedges. The 40 mm capacity covers most residential and light commercial tasks.

Technical Specifications and Maintenance

All wearing parts are replaceable to extend service life. Replacement blades, anvils, and springs are available from authorized distributors. The pivot bolt should be checked periodically for tightness. Blade edges can be honed with a fine file to restore sharpness. Handles should be wiped clean after use to prevent sap buildup. Store the tool in a dry location to protect aluminium surfaces from oxidation.

• Cutting capacity: 40 mm diameter
• Overall length: 800 mm
• Weight: 1.15 kg
• Handle material: aluminium alloy
• Blade type: hollow-ground, hardened steel
• Cutting mechanism: anvil with curved support
• Gear system: 65 percent force increase
• Grip coating: non-slip, phthalate-free
• Shock absorbers: cushioned bumpers
• Replacement parts: blade, anvil, springs, pivot hardware

The FELCO 231 is manufactured in Switzerland using renewable energy sources. Quality control procedures ensure consistent performance across production batches. The tool is designed for professional and semi-professional use where durability and cutting efficiency are priorities.