Hedge shears FELCO 250-63, 630 mm blade

Hedge shears FELCO 250-63 feature a 630 mm overall length and 250 mm cutting blade for trimming hedges and shrubs. The chrome-plated steel blade resists corrosion and maintains sharpness over time. Extruded aluminum handles reduce weight while providing structural rigidity. The 13-degree angled cutting head aligns naturally with wrist position during horizontal cuts. This tool is built for professional landscapers and garden maintenance crews who require consistent cutting performance.

The blade is forged from hardened steel and finished with chrome plating. This surface treatment protects against moisture and sap. The inner edge includes a serrated section for gripping wire and thicker woody stems. A grease bolt allows lubrication without disassembly. Shock-absorbing buffers at the handle base reduce impact during closing strokes. All replacement parts are available separately to extend service life.

Construction and materials of hedge shears 630 mm

The handles are manufactured from extruded aluminum with powder-coat finish. This material combination delivers high strength-to-weight ratio. Soft-grip sleeves cover the handle surfaces. These sleeves are free from phthalates and provide secure hold in wet conditions. The pivot assembly uses a precision bolt with integrated lubrication channel. This design maintains smooth blade movement under load.

• Total length: 630 mm
• Blade length: 250 mm
• Maximum cutting diameter: 10 mm
• Blade material: chrome-plated hardened steel
• Handle material: extruded aluminum with powder coating
• Cutting head angle: 13 degrees
• Weight: 1.12 kg

The serrated inner edge grips branches and prevents slippage during the cutting stroke. The chrome plating extends blade life in humid environments. The grease bolt simplifies maintenance by allowing direct lubrication of the pivot point. Shock-absorbing buffers are positioned at the handle base to cushion impact forces. This feature reduces hand fatigue during repetitive cutting tasks.

Blade geometry and cutting mechanism

The blade is ground to a sharp edge and heat-treated for edge retention. Chrome plating covers the entire blade surface. The 13-degree angle positions the cutting plane parallel to hedge surfaces when arms are extended. This geometry reduces the need for wrist rotation. The serrated section measures approximately 50 mm and is located near the pivot. It engages thin wire and fibrous stems that might slip on a smooth edge.

• Blade edge: ground and heat-treated
• Surface finish: chrome plating
• Serrated section length: approximately 50 mm
• Cutting action: bypass shear

The bypass shear design brings the moving blade past a fixed anvil. This action produces a clean cut with minimal crushing of plant tissue. The blade gap is factory-set to balance cutting efficiency and edge durability. Users can adjust tension via the pivot bolt if needed. The grease bolt accepts standard lithium-based grease for periodic lubrication.

Handle design and ergonomics

Extruded aluminum handles provide rigidity without excessive weight. The powder-coat finish resists scratching and wear. Soft-grip sleeves are molded to fit the handle contours. These sleeves remain flexible in cold weather and do not harden over time. The handle length of 630 mm allows two-handed operation with extended reach. Shock-absorbing buffers are made from elastomer material and compress during blade closure.

• Handle construction: extruded aluminum
• Surface treatment: powder coating
• Grip material: phthalate-free soft polymer
• Shock absorbers: elastomer buffers
• Handle length: 630 mm

The 13-degree angled head reduces the need to bend wrists during horizontal cuts. This feature is particularly useful when trimming long hedge sections at shoulder height. The soft-grip coating provides secure hold even when hands are wet or gloved. The shock-absorbing buffers reduce vibration transmitted to the hands during repeated cutting strokes.

Common applications for professional hedge maintenance

This tool is suited to trimming formal hedges, shaping ornamental shrubs, and maintaining topiary forms. The 630 mm length provides reach for tall hedges without requiring a ladder for lower sections. The 10 mm cutting capacity handles most deciduous and evergreen hedge species. Landscaping contractors use this model for routine maintenance of residential and commercial properties. Municipal parks departments employ it for trimming public green spaces. The serrated section cuts thin support wires used in espalier training and vine management.

Maintenance and replacement parts

The grease bolt allows lubrication of the pivot assembly without disassembly. Apply lithium-based grease through the bolt opening after every 20 hours of use. Clean sap and debris from the blade with a soft brush and mild solvent. Inspect the blade edge for nicks or dullness. Replacement blades and handles are available as separate components. The pivot bolt and shock-absorbing buffers can also be replaced individually. This modular design extends the service life of the tool and reduces waste.

• Lubrication interval: every 20 hours of use
• Lubricant type: lithium-based grease
• Blade cleaning: soft brush and mild solvent
• Replacement parts: blades, handles, pivot bolt, buffers

Store the tool in a dry location to prevent corrosion. Wipe the blade dry after use in wet conditions. Periodic inspection of the pivot bolt ensures proper tension. Tighten the bolt if excessive play develops between the blades. Replace worn shock-absorbing buffers when they no longer compress smoothly. All replacement parts are identified by part numbers in the manufacturer catalog.

Technical specifications summary

The FELCO 250-63 is manufactured in Switzerland using renewable energy sources. The production process emphasizes material efficiency and component longevity. The tool is designed with input from professional landscapers to meet field requirements. The chrome-plated blade resists corrosion in humid climates. The extruded aluminum handles balance strength and weight. The 13-degree angled cutting head reduces operator fatigue during extended use. The grease bolt simplifies maintenance. All components are available as replacement parts.