Two-hand bypass loppers with 500 mm overall length cut branches up to 35 mm diameter. Aluminum handles reduce fatigue during extended use. Hardened steel blade and anvil deliver clean cuts. Shock-absorbing mechanism dampens impact forces. Non-slip coating ensures secure grip in wet conditions. Adjustable cutting tension maintains consistent performance.
Two-hand bypass loppers with 500 mm overall length are built for pruning branches up to 35 mm in diameter. The straight cutting head positions the blade perpendicular to the branch. Aluminum handles keep the total weight at 725 g. Hardened steel construction extends blade life under repeated cutting loads.
The shock-absorbing system integrated into the pivot joint reduces vibration transmitted to the operator's hands. A non-slip coating on the handles maintains grip security during wet or humid conditions. The adjustable cutting mechanism allows users to fine-tune blade tension as wear occurs over time.
Aluminum handles form the frame, balancing strength with low weight. The cutting blade and anvil are manufactured from hardened steel. The straight head design optimizes contact angle for clean cuts. A 66 mm blade length provides sufficient cutting surface for branches within the rated capacity.
The pivot mechanism houses the shock-absorbing component, which compresses during the cutting stroke to reduce peak forces. The adjustment screw permits blade tension modification without disassembly. This feature compensates for wear and maintains cutting efficiency throughout the tool's service life.
The bypass design positions the blade past the anvil in a scissor action. This configuration produces a cleaner cut than anvil-only designs. The 35 mm capacity suits medium to large branches commonly found in orchards and landscape maintenance. The straight head aligns the cutting force along the handle axis.
Hardened steel retains edge sharpness longer than unhardened alloys. The anvil supports the branch during the cut, preventing crushing or tearing of bark tissue. Regular blade maintenance preserves cutting quality and reduces the force required per cut.
These loppers are used in orchards for fruit tree pruning, in nurseries for shaping young stock, and in urban green spaces for branch removal. The 500 mm length provides reach without requiring ladders for moderately elevated branches. The 35 mm capacity handles most deciduous and evergreen species encountered in commercial and residential landscapes. Operators in vineyards, parks, and private gardens rely on this tool for seasonal pruning tasks.
Clean the blade after each use to remove sap and debris. Apply lubricating oil to the pivot and blade surfaces periodically. Replacement parts include cutting blades, anvils, springs, and shock-absorber components. Compatible accessory codes are listed in the manufacturer's catalog for easy ordering.
Using genuine replacement parts ensures dimensional compatibility and material performance. Regular maintenance extends tool life and maintains cutting precision. Inspect the shock absorber and adjustment mechanism annually for wear or damage.
| SKU | Image | Price VNĐ | Product name & short description | |
|---|---|---|---|---|
| 2-30 |
![]() |
€0.87
|
2/30
2/30 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 2-16 |
![]() |
€2.39
|
2/16
2/16 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 20-11 |
![]() |
€1.61
|
20/11
20/11 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 200-3 |
![]() |
€41.55
|
200/3
200/3 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 20-9 |
![]() |
€7.26
|
20/9
20/9 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 20-93 |
![]() |
€8.77
|
20/93
20/93 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 20-94 |
![]() |
€32.47
|
20/94
20/94 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 20-5 |
![]() |
€1.01
|
20/5
20/5 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 20-7 |
![]() |
€1.61
|
20/7
20/7 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 20-10 |
![]() |
€5.58
|
20/10
20/10 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 20-8 |
![]() |
€33.04
|
20/8
20/8 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 200-6 |
![]() |
€3.33
|
200/6
200/6 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 200A-32 |
![]() |
€46.19
|
200A/32
200A/32 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 200-35 |
![]() |
€8.87
|
200/35
200/35 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 200-37 |
![]() |
€51.20
|
200/37
200/37 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| 200-4 |
![]() |
€50.02
|
200/4
200/4 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|















| SKU Code | Price (EUR) | Stock | |
|---|---|---|---|
| Loading variants... | |||
