The REMS Picus S1 core drill 180000 R220 is the bare drive unit of the S1 line, sold without a steel case. 1850 W, 580 rpm, reinforced concrete up to Ø102 mm, Ø132 mm on a stand, masonry up to Ø162 mm, 5.2 kg. Takes REMS diamond core crowns with UNC 1¼ thread.
The REMS Picus S1 core drill 180000 R220 is the bare drive unit of the S1 line, sold without a steel case. It suits users who already own a stand and crowns and need an extra or replacement motor. Typical jobs are holes for water pipes, ventilation ducts and cable trays through walls and floors. The Picus S1 line uses a 1850 W motor with a load speed of 580 rpm. It drills steel-reinforced concrete up to Ø102 mm hand held and up to Ø132 mm on a drill stand. In masonry and other materials it reaches Ø162 mm. The drive unit weighs only 5.2 kg and works dry or wet. REMS rates a Ø62 mm hole, 200 mm deep in reinforced concrete, at about 3 minutes.
Before ordering, check the largest hole size, the wall or floor material and whether water can be used on site. These three points decide between a drive unit, a Basic-Pack or a set with a stand.
Item 180000 R220 includes:
The machine takes REMS UDKB and UDKB LS universal core crowns, 420 mm drilling depth. The UNC 1¼ thread is the REMS standard, so one set of crowns fits every Picus. Compatible stands: REMS Simplex 2 stand (up to Ø202 mm) or REMS Titan stand (up to Ø300 mm, tilting 45°).
Drilling concrete, masonry and stone releases fine quartz dust that is harmful to inhale. EN 60335-2-69 requires at least a class M safety extractor. REMS Pull 2 M meets this class and connects directly to the Picus suction port.
| SKU | Image | Price VNĐ | Product name & short description | |
|---|---|---|---|---|
| 180010 R220 |
![]() |
€2,069.80
|
REMS Picus S1 diamond core drill Basic-Pack 180010 R220
The REMS Picus S1 Basic-Pack 180010 R220 is the starter kit of the S1 line. 1850 W, 580 rpm, reinforced concrete up to Ø102 mm, Ø132 mm on a stand, masonry up to Ø162 mm, 5.2 kg. Takes REMS diamond core crowns with UNC 1¼ thread.
|
|
| 180020 R220 |
![]() |
€2,264.46
|
REMS Picus S1 diamond core drill Set 62 180020 R220
The REMS Picus S1 Set 62 180020 R220 combines the S1 Basic-Pack with a UDKB Ø62 mm crown. 1850 W, 580 rpm, reinforced concrete up to Ø102 mm, Ø132 mm on a stand, masonry up to Ø162 mm, 5.2 kg. Takes REMS diamond core crowns with UNC 1¼ thread.
|
|
| 180031 R220 |
![]() |
€3,550.48
|
REMS Picus S1 diamond core drill Set UDKB 62 Simplex 2 180031 R220
The REMS Picus S1 Set UDKB 62 Simplex 2 180031 R220 is the most complete S1 set. 1850 W, 580 rpm, reinforced concrete up to Ø102 mm, Ø132 mm on a stand, masonry up to Ø162 mm, 5.2 kg. Takes REMS diamond core crowns with UNC 1¼ thread.
|
|
| 180032 R220 |
![]() |
€3,355.75
|
REMS Picus S1 diamond core drill Set Simplex 2 180032 R220
The REMS Picus S1 Set Simplex 2 180032 R220 combines the S1 Basic-Pack with the Simplex 2 drill stand. 1850 W, 580 rpm, reinforced concrete up to Ø102 mm, Ø132 mm on a stand, masonry up to Ø162 mm, 5.2 kg. Takes REMS diamond core crowns with UNC 1¼ thread.
|
|
| 181050 R |
![]() |
€293.17
|
Diamond core bit Ø112 mm x 420 mm REMS 181050 R, UDKB
Induktiv gelötet, wiederbelegbar. Universell einsetzbar zum Trocken- und Nassbohren, handgeführt oder mit Bohrständer. Für viele Materialien, z. B. Beton, Stahlbeton, Mauerwerk aller Art, Naturstein, Asphalt, Estrich aller Art. Anschlussgewinde UNC 11/4 innen…
|
|
| 181103 R |
![]() |
€822.10
|
Diamond core bit set UDKB 62+102+125 REMS 181103 R
Induktiv gelötet, wiederbelegbar. Universell einsetzbar zum Trocken- und Nassbohren, handgeführt oder mit Bohrständer. Für viele Materialien, z. B. Beton, Stahlbeton, Mauerwerk aller Art, Naturstein, Asphalt, Estrich aller Art. Anschlussgewinde UNC 11/4 innen…
|
|
| 181113 R |
![]() |
€904.48
|
Diamond core bit set UDKB LS 62+102+125 REMS 181113 R
Lasergeschweißt, hochtemperaturbeständig. Universell einsetzbar zum Trocken- und Nassbohren, handgeführt oder mit Bohrständer. Für viele Materialien, z. B. Beton, Stahlbeton, Mauerwerk aller Art, Naturstein, Asphalt, Estrich aller Art. Anschlussgewinde UNC 11…
|
|
| 181435 R |
![]() |
€263.59
|
Diamond core bit Ø82 mm x 420 mm REMS 181435 R, UDKB LS laser-welded
Lasergeschweißt, hochtemperaturbeständig. Universell einsetzbar zum Trocken- und Nassbohren, handgeführt oder mit Bohrständer. Für viele Materialien, z. B. Beton, Stahlbeton, Mauerwerk aller Art, Naturstein, Asphalt, Estrich aller Art. Anschlussgewinde UNC 11…
|

















