Hand pressure sprayer 1.5 litre EPOCA Luna 1500 Marine for gardening

The 1.5 litre hand pressure sprayer EPOCA Luna 1500 Marine holds 1500 ml of liquid, with 1200 ml usable volume. The deep sea blue bottle is moulded in thick HDPE. Pressure is built by a hand pump with a Ø6 mm plastic rod. Spraying is triggered by finger pressure on the lever.

The plastic nozzle lets you set the spray cone width at the tip, from a fine mist to a narrower jet. A safety valve vents automatically above 3 bar, so the tank does not stay over-pressurised. Nitrile rubber seals handle repeated pumping cycles. A trigger lock keeps the spray running without holding the lever. The compact format suits potted plants, indoor greenery and small workspaces. Made in Italy by EPOCA.

1.5 litre hand pressure sprayer EPOCA Luna 1500 Marine in detail

This model belongs to the Luna 1500 line, offered in deep sea blue Marine and in tomato red Lava. Both share the same bottle, pump and nozzle. Liquid temperature must stay between +5 °C and +30 °C. Industrial chemicals are outside the scope of use. Keeping one bottle per solution avoids cross-contamination between fertilisers and plant treatments.

Construction and pump unit

The bottle body is thick-walled HDPE, a material used widely for garden liquids and diluted household solutions. The pump rod is reinforced plastic with a Ø6 mm diameter, so no metal parts sit in contact with the liquid. The trigger works under finger pressure and includes a lock catch. Sealing is handled by nitrile rubber gaskets at the pump and neck.

• Bottle material: thick HDPE
• Total capacity: 1500 ml
• Usable capacity: 1200 ml
• Pump rod: reinforced plastic, Ø6 mm
• Seals: nitrile rubber
• Colour: deep sea blue Marine

Filling to the usable level leaves an air cushion above the liquid, which is what the pump compresses. Short pump strokes are enough for light misting. Longer stroke sequences give a firmer spray. After work, releasing residual pressure and rinsing the bottle keeps the nozzle channel clear for the next solution.

Nozzle and pressure control

The nozzle is plastic and adjustable by rotation, so the operator changes the spray pattern without tools. A relief valve opens above 3 bar and discharges excess pressure. The trigger lock supports continuous spraying over a row of plants. Together these features keep the working pressure within the range the bottle is built for.

• Adjustable plastic nozzle, spray cone set at the tip
• Safety valve with automatic discharge above 3 bar
• Trigger lock for continuous spraying
• Finger-operated trigger lever
• Liquid temperature range: +5 °C to +30 °C

Mist output suits foliar feeding, where droplets should stay fine and even. A tighter jet helps when reaching soil at the base of a pot. Because pressure is generated manually, output can be dosed for delicate leaves. Always check that the nozzle is clean before switching from fertiliser to a soap or insecticide solution.

Common applications

Typical work includes watering ornamental plants, misting indoor greenery and treating small plots.

Laboratory and office plant care is covered as well, using plain water or plant protection liquids. Users often dedicate one bottle to rooting stimulant, another to liquid NPK or urea nitrogen. Diluted soap solutions and insecticides are also within the stated use range. Small volumes of many different solutions are easier to manage this way.

Packing options from the manufacturer

Two carton formats are listed. A 12-piece carton carries code 8324.R11 and contains six tomato red Lava bottles plus six deep sea blue Marine bottles. A 28-piece carton carries code 8324.R14. The suffix on 8324.R14 D1 is relevant to importers only: D1 identifies the Lava colour and D2 the Marine colour.