Cutting barbed wire and twisted cable up to Ø5 mm, the FELCO CDO works from one hand. The cutting notch sits at 90° to the body, so a single strand can be isolated inside a bundle. The hardened blade is oil-tempered and black anodised. A worm spring, latch lock and plastic-coated handles complete this 195 mm, 280 g cutter.
One-hand cable cutter FELCO CDO cuts barbed wire and twisted cable up to Ø5 mm. The cutting head sits at 90° to the handles. That angle lets you reach a single strand inside a cable bundle. You hold the wire at the bottom of the notch, then close the handles.
Total length is 195 mm, about 7.7 inch, and the tool weighs 280 g. It fits a pocket or a tool pouch during a site walk. FELCO builds the cutter in Switzerland, with a hardened steel blade and a central bolt. The handles are steel with a black plastic coating. A worm spring reopens the jaws after each cut. A latch lock keeps the blade closed when the cutter is stored.
Cutting work on fencing lines often happens far from a bench. This model answers that case with a short body, a single-hand grip and a notch that traps the wire instead of pushing it away. The 90° head keeps your knuckles clear of neighbouring strands. Capacity is stated at Ø5 mm for steel cable and barbed wire.
The blade is hardened steel, tempered in oil and finished with a black anodised coating that supports corrosion resistance. It turns on a central bolt, so the cutting pair stays aligned through the life of the tool. The notch is shaped to catch barbed wire low on the blade, where leverage is highest. The transverse head suits detail cuts inside bundled cable.
Handles are steel with a classic black plastic coating, giving a firm grip without slipping. A worm-type spring returns the handles after each cut, with light reaction force that limits fatigue over long sessions. A latch lock holds the blades shut for transport and storage. A length of 195 mm and a mass of 280 g keep the cutter easy to carry.
Fencing crews use the cutter to trim and remove barbed wire along posts and gates. Agricultural and vineyard teams cut tensioning wire and small steel cable in the field. Maintenance staff pick out and cut a single conductor or strand inside a bundle, where the 90° head is useful. The pocket format also suits inspection rounds, where carrying a large bolt cutter is impractical.
The catalogue describes the cutter as built for barbed wire, with a construction that lets the wire be caught and held at the bottom of the jaws. It lists a hardened steel blade, a central bolt and steel handles with a plastic coating. Stated capacity covers barbed wire and cable of about 5 mm diameter. Recorded figures are 195 mm length and 280 g weight.
Service items listed with this model include three parts.
Replacing these parts restores the joint setting and cutting contact without changing the whole tool. Order them to match the cutter before service work begins.
| SKU | Image | Price VNĐ | Product name & short description | |
|---|---|---|---|---|
| C7-5 |
![]() |
€4.86
|
C7/5
C7/5 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| C7-4 |
![]() |
€11.06
|
C7/4
C7/4 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| C7-10 |
![]() |
€2.82
|
C7/10
C7/10 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|










| SKU Code | Price (EUR) | Stock | |
|---|---|---|---|
| Loading variants... | |||



