Cutting capacity reaches Ø3mm on steel cable, wire, springs and bar stock. FELCO C3 runs a hardened high-speed steel blade with a bevelled edge. The narrow jaw opening gathers fine strands inward and limits slipping. Formed steel handles measure 190mm in total length and carry soft plastic grips. A latch on the handle locks the blades closed.
Steel cable cutting pliers FELCO C3 cut wire rope up to Ø3mm in one hand. The tool targets repetitive cutting of high-strength steel cable used in the pneumatics industry. Its jaw is shaped with a small opening, so fine strands are gathered inward during the cut. The bevelled blade edge keeps the rope from sliding out of the jaw. Blade material is hardened high-speed steel, chosen for frequent high-intensity cutting.
Total length is 190mm and weight is 270g, so the unit stays easy to handle on a bench or in the field. Handles are formed from U-section steel, oil hardened, then covered with soft plastic grips. Both handle legs are curved to sit compactly in the palm. A latch mounted on the handle locks the blades in the closed position. The worm-type spring is removable and returns the handles with light, steady force.
The head carries a hardened high-speed steel blade with a bevelled cutting edge. A narrow opening angle suits fine strands and small diameters, where wider jaws tend to push wire aside. During the cut, the geometry draws strands toward the centre of the jaw. That reduces strand slip and keeps the rope end tidy for threading or clamping.
Handle legs are pressed from U-section steel with a wavy profile, which resists bending under hand load. The surface is oil hardened, then fitted with soft plastic sleeves for grip. The curved shape closes the pliers compactly inside the palm. A worm-type spring handles the return stroke and can be removed for cleaning or replacement.
Wear parts can be replaced instead of discarding the whole tool. The cutting blade is supplied with its screw, and the locking nut is available separately. Handle sleeves can also be renewed when the plastic becomes worn or oil soaked. Keeping these items on the shelf shortens downtime in workshops that cut cable every shift.
Tyre and pneumatics workshops use this cutter on radial ply carcass steel cable. It also serves electrical and mechanical maintenance teams that trim zinc wire and small rope. Spring makers cut coil stock and short lengths of bar within the Ø3mm limit. Site crews carry it for fencing wire, binding wire and cable tail trimming. The handle latch keeps the blades closed during transport in a tool bag or pouch.
Catalog data lists a one-hand cable cutter for steel cable, zinc wire, springs and bar stock. Stated cutting capacity is Ø3mm. The blade is hardened high-speed steel with a bevelled edge that resists strand slip. Handles are formed steel, wavy profile, covered in soft plastic. The spring is a removable worm type, and a latch locks the blades. Recorded length is 190mm and weight 270g.
| SKU | Image | Price VNĐ | Product name & short description | |
|---|---|---|---|---|
| C7-5 |
![]() |
€4.86
|
C7/5
C7/5 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| C7-4 |
![]() |
€11.06
|
C7/4
C7/4 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|
|
| C7-35 |
![]() |
€6.87
|
C7/35
C7/35 is a genuine FELCO spare part for maintenance, repair, or replacement on compatible FELCO tools. Suitable for dependable upkeep and consistent daily operation.
|










| SKU Code | Price (EUR) | Stock | |
|---|---|---|---|
| Loading variants... | |||



