Pressure sprayer 7 litre with detachable lance EPOCA Oceania 7

The 7 litre pressure sprayer Oceania 7 from EPOCA holds 7000 ml in the tank and 5600 ml of usable liquid. Pressure is built by an integrated piston pump fitted directly into the body. A safety valve opens at 3 bar and vents excess pressure. The lance is separate from the tank and connects through a flexible hose of 1.4 m. Its handle measures 65 cm, so plants and surfaces can be reached without bending.

The tank is moulded in recyclable HDPE in a lime yellow colour, with a diameter of 200 mm. A removable hip strap lets the operator carry the unit at the side. The trigger on the spray handle controls flow during work. A strainer sits at the suction point and filters the solution before it enters the pump circuit. The rigid tube of the lance clips onto the carrying handle for storage.

7 litre pressure sprayer for garden care and light cleaning

The sprayer is supplied in a carton with its accessories included. It is made in Italy by EPOCA.

Tank, pump and carrying system

Filling is done through a wide opening on the top of the tank, which speeds up mixing and refilling. The piston pump is built into the body rather than bolted on. The HDPE shell keeps net weight at 1550 g when empty. A hip strap can be clipped on or removed according to how the operator prefers to carry the unit during longer sessions.

• Tank capacity: 7000 ml
• Usable volume: 5600 ml
• Tank diameter: 200 mm
• Material: recyclable HDPE, lime yellow
• Integrated piston pump with large filling port
• Removable hip carrying strap
• Net weight: 1550 g

The rigid section of the lance hooks onto the carry handle after use. This keeps the hose tidy and reduces the risk of kinking during transport or storage.

Spray lance and jet performance

The nozzle is moulded in plastic and the jet pattern can be adjusted at the tip. With the tank pumped to working pressure, the straight jet reaches up to 8.5 m. Switched to mist, the cone opens at 60 degrees. Flow per second changes with droplet size, so fine misting and stream watering consume liquid at different rates.

• Maximum working pressure: 3 bar
• Jet reach at full pressure: up to 8.5 m
• Mist cone angle: 60 degrees
• Lance handle length: 65 cm
• Connecting hose length: 1.4 m
• Trigger-operated spray handle
• Adjustable plastic nozzle
• Filter screen at the suction inlet

Because the lance is detached from the tank, the sprayer can stay on the ground or at the hip while spraying. That helps when treating tall shrubs or the underside of leaves.

Safety valve and operating limits

A safety valve limits internal pressure and releases at 3 bar, which protects the tank from over-pumping. The sprayer is intended for plant care solutions and cleaning liquids used between 5 degrees C and 30 degrees C. Operators should respect these limits and the chemical guidance of the solution supplier before filling the tank.

• Safety valve opening pressure: 3 bar
• Operating liquid temperature: 5 to 30 degrees C
• Suitable for plant care and cleaning solutions
• Gross weight with carton: 1840 g

Rinsing the tank, hose and nozzle after each use keeps the filter clear and prevents residue from blocking the spray tip.

Common applications

Gardeners use the sprayer for foliar feeding, watering seedlings and treating ornamental plants.

Nurseries and greenhouses apply it for misting young shoots. Facility teams use it for cleaning solutions on floors, windows and equipment surfaces. Balcony and rooftop growers appreciate the 5600 ml usable volume, which covers a small area without frequent refills. The 8.5 m jet reach is useful for hedges, climbing plants and high foliage in courtyards.

Catalogue reference data

Tank 7000 ml, usable 5600 ml, diameter 200 mm, HDPE body. Lance handle 65 cm on a 1.4 m hose, plastic adjustable nozzle, trigger control. Safety valve at 3 bar, jet reach 8.5 m, mist cone 60 degrees. Net weight 1550 g, gross weight 1840 g with carton.