3 litre pressure sprayer EPOCA Solare 3 with detachable wand

The 3 litre pressure sprayer features a 3600 ml tank with 2880 ml usable liquid capacity. Pressure is generated by a hand lever on top of the vessel. When internal pressure exceeds 3 bar, the safety valve opens to release excess pressure, preventing tank rupture. The spray wand is separate from the main body and connects via a 1400 mm flexible hose.

Spray pressure at the nozzle outlet reaches 3 bar. In single-jet mode, the spray can reach up to 8.5 m. Rotating the nozzle produces a mist cone up to 60 degrees, ensuring even coverage of foliage. The pump lever also serves as a carry handle, and a removable shoulder strap is included. The unit is made from recyclable plastic and manufactured in Italy.

3 litre pressure sprayer with separate pump wand and hose

The split design is the primary functional feature of this sprayer. With the 520 mm wand held in one hand, the user can direct spray under leaves or into dense shrubs, while the tank remains on the shoulder or on the ground. The 1400 mm hose provides flexibility without destabilizing the bottle.

Tank and pressure control

Filling is limited to the usable mark, leaving an air cushion above the liquid to store pump pressure between strokes. The relief valve is preset to vent above 3 bar, so repeated pumping will not over-pressurize the vessel. The body diameter is 150 mm, providing stability when placed on a bench or path.

• Tank capacity: 3600 ml
• Usable liquid volume: 2880 ml
• Safety relief valve: vents above 3 bar
• Body height: 370 mm; body diameter: 150 mm
• Weight: 1080 g

Pressure decreases as liquid is dispensed, so a few extra pumps restore the spray jet. Operating at the full 3 bar provides maximum reach and finest droplet size, while lower pressure is suitable for close-range work. The plastic body is recyclable at end of life.

Spray output and nozzle patterns

Two output modes accommodate most plant care needs. The single jet focuses the flow and reaches up to 8.5 m at full pressure. The cone setting disperses droplets over a 60 degree angle for foliage and seedbeds. Flow rate varies with the selected pattern, allowing predictable treatment times once a setting is chosen.

• Single-jet reach: 8.5 m at full pressure
• Mist flow rate: 0.83 litre per minute
• Flow at 60 degree cone: 0.47 litre per minute
• Maximum pressure at nozzle outlet: 3 bar
• Spray wand length: 520 mm
• Hose length: 1400 mm

The longer wand reduces the need to lean over treated plants, and the hose keeps the tank off the wrist during extended use. Use the mist setting for leaf treatments and the jet for reaching tall or distant plants.

Common applications

This sprayer is ideal for garden and balcony plant care, including foliar feeding, leaf washing, and treating ornamental shrubs.

Nurseries and plant shops use it for misting seedlings and potted plants. It is also suitable for small greenhouse work, where the 60 degree cone quickly covers trays. Additional uses include applying cleaning solutions to surfaces and controlling dust in small workshops. The 2880 ml capacity is suitable for short tasks without refilling.

Catalogue technical content

Catalogue data specifies a 3600 ml tank with 2880 ml usable volume, a 370 mm high body with a 150 mm diameter, and a weight of 1080 g. The integrated pump lever doubles as a carry handle, and the shoulder strap is removable. The relief valve opens above 3 bar. Output is recorded at 0.83 litre per minute in mist mode and 0.47 litre per minute at a 60 degree cone, with a single-jet reach of 8.5 m. The product is fully manufactured in Italy.