The REMS RAS Cu pipe cutter, article 113255 R, cuts pipes from 3 to 25 mm in diameter, i.e. 1/8 to 1 inch. The cutter is intended for copper pipes. The cutting wheel runs around the pipe, tightened a little further with each turn until the pipe is severed. Genuine REMS product.
The REMS RAS Cu pipe cutter, article number 113255 R, is a hand-held pipe cutter from REMS. It cuts pipes with an outside diameter from 3 to 25 mm, that is 1/8 to 1 inch. The manufacturer states the cutter is intended for copper pipes. The cutter wheel bears against the pipe wall, the tool is rotated around the pipe and tightened a little further with each turn. This cutting method produces an evenly rounded cut edge without deforming the pipe.

The support rollers keep the pipe centred throughout the cutting process. The spindle in the handle adjusts the opening width to the pipe size. The cutter wheel can be replaced when worn. The cutter suits air conditioning installers, plumbers and electromechanical technicians. Supplied in hanging blister packaging according to the manufacturer's specification.
Clamp lightly, turn one full rotation, then tighten a little further each time rather than tightening hard in one step. Hold the cutter at a right angle to the pipe so the cut does not run off at an angle. Wipe chips and metal dust off the cutter wheel after use. Apply a little oil to the spindle and the rollers, and store the cutter in a dry place.

















| SKU Code | Price (EUR) | Stock | |
|---|---|---|---|
| Loading variants... | |||
