Hotline: 096 779 3398 Email: [email protected]
One-handed clamp

GearKlamp GK

★ 0.0 (0 reviews)
Sold: 32
Views: 0
Imported from: Germany

High-quality two-component plastic handle positioned around the rail, so clamp can be used in tight spaces Clamping force up to 2,000 N Easy-to-move trapezoidal thread spindle with swivelling pressure plate Quick-release shift but

SKU: GK-
4 variants
€46.40 - €60.24
Stock status: Varies by SKU
Indicative price
Price list & Ordering
Drag to reorder
SKU Code Price (EUR) Buy Stock Clamping force Jaw depth Jaw opening Rail section Weight
GK15 €46.40 6 2000n 60mm 150mm 19x6mm 618g
GK30 €50.52 1 2000n 60mm 300mm 19x6mm 727g
GK45 €54.14 6 2000n 60mm 450mm 19x6mm 837g
GK60 €60.24 2000n 60mm 600mm 19x6mm 942g
Description

Product details

  • High-quality two-component plastic handle positioned around the rail, so clamp can be used in tight spaces
  • Clamping force up to 2,000 N
  • Easy-to-move trapezoidal thread spindle with swivelling pressure plate
  • Quick-release shift button to quickly adjust sliding bar
  • On carded hang-pack

Product description

Unique compact design

The GearKlamp is extremely flexible and can even be used in the tightest of spatial conditions:

  • due to the patented mechanism that separates the handle from the spindle and positions it around the rail
  • due to the crossed v-grooves on the upper section for securely holding round, pointed and angular components

Ergonomic use

The clamp contains all kinds of clamping technology and guarantees the user greater comfort:

  • due to the high-quality two-component plastic handle for safe handling
  • due to the quick-release shift button for quickly adjusting the sliding bar
  • due to the swivelling pressure plate for exact alignment of the workpiece

Robust technology

Meeting the BESSEY quality promise was a focus in development, and so the transmission clamp is also a winning choice in terms of durability:

  • due to the use of high-quality materials, such as fibreglass-reinforced polyamide for the top and bottom, as well as hardened, tempered and burnished steel for the profiled rails
  • due to the sliding bar’s plastic housing, the driving mechanism is protected from dust and splintering

Areas of application

Furniture and joinery works

Carpentry and woodwork

  • Kitchen construction and shop fitting
  • Interior fittings
  • Dry construction
  • DIY

Safety information

Use the product only in its original condition.

Use the product only for its intended purpose. Improper use can cause personal injury or property damage.

  • Wear safety glasses to protect your eyes.
  • Wear work or assembly gloves to protect your hands.
  • Wear safety footwear to protect your feet.
  • Thew handle must always be free of oil and grease to prevent slipping.
  • Keep the product out of reach of children.
  • Small parts must not be swallowed or inserted into body openings.
  • Check the product for damage before each use and make sure that all moving parts are working properly.
  • A damaged product must not be used.
  • Follow the care instructions for each product – see vinatools.com.
  • Use only original BESSEY spare parts
  • The clamping tool must not be used for lifting, pulling or leaning.
  • The clamping tool must not be used to secure cargo during transportation.
  • The clamping tool may only be tightened by hand without any additional aids.
  • The clamping tool must not be used for permanent installation.
  • Regularly check that the end stop is working properly when using clamps.

Material / Surface

Upper and lower section made of reinforced PA6 plastic with inserted sheet metal parts for reinforcement

Rail made of hardened steel, burnished

  • Handle made of 2-component plastic
  • Protective caps made of plastic

Care instructions

Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).

Clean the rails with solvent.

  • Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
  • If the rail is shiny, roughen both narrow sides with emery cloth (100 grain).

Accessories / Suitable for

  • Edge clamp KT5 | Practical accessory for clamping edges and difficult to reach areas - Suitable for conventional screw clamps with a max. rail thickness of 13 mm | https://vinatools.com/static/bessey-mirror/pages/edge-clamp-kt5-7779b5d166.html
SpecificationValue
Openingmm150
Throat depthmm60
Railmm19x6
Weightkg0.618

Specifications

  • Cơ cấu ăn khớp bánh răng (GearKlamp) cho phép vận hành một tay, kẹp nhanh và nhả nhanh
  • Thiết kế gọn nhẹ không có tay vặn nhô ra, phù hợp làm việc trong không gian hẹp và khoang trật
  • Ngàm kẹp làm từ sợi thủy tinh gia cường, chịu lực tốt và bền bỉ
  • Thanh cái thép hợp kim tôi cao tần thiết diện 19×6 mm, độ cứng vững cao, không vặn xoắn
  • Tay cầm kiêm cơ cấu truyền lực, thiết kế ergonomic chống trượt, không gây mỏi tay khi sử dụng lâu
  • Cơ cấu bánh răng được bao kín, chống bụi mùn cưa xâm nhập gây kẹt hoặc hư hỏng
  • Điều chỉnh lực kẹp chính xác, tránh làm xô lệch hoặc hư hỏng phôi gia công
  • Trượt dọc thanh cái nhanh chóng, tinh chỉnh vị trí dễ dàng và tỉ mỉ
  • Ứng dụng kẹp phôi gỗ trong gia công mộc, lắp ráp đồ gỗ và chế tác nội thất
  • Vật liệu nhựa ABS cao cấp kết hợp thép, trọng lượng nhẹ, độ bền cao

Product reviews

Based on 0 reviews
0.0
Overall
5★ 0
4★ 0
3★ 0
2★ 0
1★ 0

Be the first to review “GearKlamp GK”

🎁 Write a review to earn 20 reward points — photo +10, video +15.
Accumulate reward points to redeem unique gifts from Minh Khang Vinatools. Log in
Please log in to submit a review.
Recently viewed
No items yet