Hotline: 096 779 3398 Email: [email protected]
One-handed clamp

One-handed clamp with 2K plastic handle 2K

★ 0.0 (0 reviews)
Sold: 8
Views: 0
Imported from: Germany
Origin: Made in Germany

Clamping force of up to 3,500 N Clamp and fix in place quickly and simply with just one hand With protection caps on the clamping surfaces With protective caps on the clamping surfaces

SKU: EHZ-
2 variants
€82.30 - €99.69
Stock status: Varies by SKU
Indicative price
Price list & Ordering
Drag to reorder
SKU Code Price (EUR) Buy Stock Jaw depth Jaw opening Weight
EHZ30-2K €82.30 12 100mm 300mm 1,250g
EHZ60-2K €99.69 100mm 600mm 1,670g
Description

Product details

  • Clamping force of up to 3,500 N
  • Clamp and fix in place quickly and simply with just one hand
  • With protection caps on the clamping surfaces
  • With protective caps on the clamping surfaces

Product description

Parallel handle with pump lever

The ergonomically shaped handle with pump lever runs parallel to the rail. That way, balanced, safe handling is always guaranteed.

Rapid move button

This button allows you to move the sliding arm at any time, quickly and with minimum effort.

Plastic pressure caps

The removable plastic caps provide a non‐marring soft touch for use with wood and finished metal surfaces.

Versatility

Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and elastic.

Areas of application

Furniture and joinery works

Kitchen construction and shop fitting

  • Staircase construction
  • Interior fittings
  • Dry construction
  • DIY
  • One-handed clamping

Safety information

Use the product only in its original condition.

Use the product only for its intended purpose. Improper use can cause personal injury or property damage.

  • Wear safety glasses to protect your eyes.
  • Wear work or assembly gloves to protect your hands.
  • Wear safety footwear to protect your feet.
  • Thew handle must always be free of oil and grease to prevent slipping.
  • Keep the product out of reach of children.
  • Small parts must not be swallowed or inserted into body openings.
  • Check the product for damage before each use and make sure that all moving parts are working properly.
  • A damaged product must not be used.
  • Follow the care instructions for each product – see vinatools.com.
  • Use only original BESSEY spare parts
  • The clamping tool must not be used for lifting, pulling or leaning.
  • The clamping tool must not be used to secure cargo during transportation.
  • The clamping tool may only be tightened by hand without any additional aids.
  • The clamping tool must not be used for permanent installation.
  • Regularly check that the end stop is working properly when using clamps.

Material / Surface

Fixed and sliding bracket made of tempered steel, galvanised

Upper and lower section made of reinforced PA6 plastic

  • Spindle with trapezoidal thread in rolled steel, burnished
  • Handle made of 2-component plastic
  • Pressure plate made of steel, cold pressed, galvanised
  • Protective caps made of plastic

Care instructions

Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).

Clean the rails with solvent.

  • Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
  • Clean and oil the spindle regularly.
  • Clean and oil the pressure plate regularly.
  • If the rail is shiny, roughen both narrow sides with emery cloth (100 grain).

Accessories / Suitable for

  • Mitre clamping system MCX | Mitre system for 22.5°, 30°, 45° and 60°angles - Even pressure on the mitre - Angle adapter can be changed without tools | https://vinatools.com/static/bessey-mirror/pages/mitre-clamping-system-mcx-a899cdb760.html
  • Edge clamp KT5 | Practical accessory for clamping edges and difficult to reach areas - Suitable for conventional screw clamps with a max. rail thickness of 13 mm | https://vinatools.com/static/bessey-mirror/pages/edge-clamp-kt5-7779b5d166.html
SpecificationValue
Openingmm300
Throat depthmm100
Railmm19,5x9,5
Weightkg1.25

Specifications

  • Lực kẹp tối đa: 3500N
  • Độ mở ngàm: 300mm hoặc 600mm tùy mã hàng
  • Độ sâu ngàm: 100mm
  • Tiết diện thanh ray: 19,5×9,5mm
  • Tay cầm: nhựa 2 màu, thiết kế ergonomic
  • Đầu kẹp: bọc nhựa tháo rời
  • Vật liệu cán và bàn ép: thép BESSEY tôi nhiệt, gia công từ một mảnh
  • Cơ chế vận hành: một tay, có nút di chuyển nhanh
  • Chức năng: kẹp và xòe
Optional Accessories
SKU Image Price VNĐ Product name & short description
MCX Mitre clamping system
€63.74
Mitre clamping system
Mitre system for 22.5°, 30°, 45° and 60°angles Even pressure on the mitre Angle adapter can be changed without tools Practical accessory for BESSEY screw clamps TG,GZ, GMZ, EZ360, EHZ, EZS, DUO and EZL/EZXL
KT5 Edge clamp
€35.39
Edge clamp
Practical accessory for clamping edges and difficult to reach areas Suitable for conventional screw clamps with a max. rail thickness of 13 mm

Product reviews

Based on 0 reviews
0.0
Overall
5★ 0
4★ 0
3★ 0
2★ 0
1★ 0

Be the first to review “One-handed clamp with 2K plastic handle 2K”

🎁 Write a review to earn 20 reward points — photo +10, video +15.
Accumulate reward points to redeem unique gifts from Minh Khang Vinatools. Log in
Please log in to submit a review.
Recently viewed
No items yet