One-handed clamp

Product details

• Innovative 360° rotating mechanism allows the handle unit to be placed around the rail – already before but also after fastening the clamp
• 12-step latching mechanism to securely hold the selected handle position
• Large clamping surfaces with removable protective caps
• Clamping force up to: 400 N / 40 kg / 80 lbs (EZ360S), 750 N / 75 kg / 165 lbs (EZ360M), 1,400 N / 140 kg / 300 lbs (EZ360)
• Can be repositioned for spreading – without tools for EZ360M and EZ360 thanks to simple release mechanism with push-button on the upper part
• One-handed operation with little effort required

Product description

All-round flexible use

The EZ360 one-handed clamp is extremely versatile:

• thanks to innovative 360° turning mechanism to perfectly adjust the handle position to the clamping task
• thanks to long protective caps to protect the workpiece surface and distribute the clamping force of up to 1,400 N
• by changing the upper part from clamping to spreading

Extremely convenient handling

On the one hand, the handle can be positioned in such a way that an optimal pumping position and thus better application of force is achieved. On the other hand, the handle can also be swivelled out of the working area after the clamping process, thus enabling several clamps to be placed in a very confined space:

• thanks to the high-quality 2-component plastic handle with pump lever, which can be completely rotated around the rail and securely locked in 12 positions
• due to the release lever on the sliding arm for quick adjustment of the opening and release of the clamp

Robustness in a unique look

Where dynamic design meets durability:

• due to the use of high-quality materials, such as fibreglass-reinforced polyamide for the top and bottom, as well as hardened, tempered, and burnished steel for the rails
• due to the plastic housing, the grip mechanism is protected from dust and chips

Areas of application

Furniture and joinery works

Kitchen construction and shop fitting

• Staircase construction
• Interior fittings
• Dry construction
• DIY
• One-handed clamping and spreading
• Assembly

Safety information

Use the product only in its original condition.

Use the product only for its intended purpose. Improper use can cause personal injury or property damage.

• Wear safety glasses to protect your eyes.
• Wear work or assembly gloves to protect your hands.
• Wear safety footwear to protect your feet.
• Thew handle must always be free of oil and grease to prevent slipping.
• Keep the product out of reach of children.
• Small parts must not be swallowed or inserted into body openings.
• Check the product for damage before each use and make sure that all moving parts are working properly.
• A damaged product must not be used.
• Follow the care instructions for each product – see vinatools.com.
• Use only original BESSEY spare parts
• The clamping tool must not be used for lifting, pulling or leaning.
• The clamping tool must not be used to secure cargo during transportation.
• The clamping tool may only be tightened by hand without any additional aids.
• The clamping tool must not be used for permanent installation.
• Regularly check that the end stop is working properly when using clamps.

Material / Surface

Upper and lower section made of reinforced PA6 plastic

Rail made of hardened steel, burnished

• Lever made of reinforced PA6 plastic
• Protective caps made of plastic

Care instructions

Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).

Clean the rails with solvent.

• Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
• Clean the fluting on the rails with a steel brush.

Accessories / Suitable for

• Installation kit for decking boards EZ-TD | Accessories for BESSEY one-hand clamps EZ360-30, EZ360-45, EZ360-60 and EZL30-8, EZL45-8, EZL60-8 - For fast and precise adjustment of decking boards up to 20 cm width - For 6, 7, 8 and 10 mm (1/4", 9/32", 5/16" and 3/8") spacing between decking boards | https://vinatools.com/static/bessey-mirror/pages/installation-kit-for-decking-boards-ez-td-8054de0381.html
• Mitre clamping system MCX | Mitre system for 22.5°, 30°, 45° and 60°angles - Even pressure on the mitre - Angle adapter can be changed without tools | https://vinatools.com/static/bessey-mirror/pages/mitre-clamping-system-mcx-a899cdb760.html
• Edge clamp KT5 | Practical accessory for clamping edges and difficult to reach areas - Suitable for conventional screw clamps with a max. rail thickness of 13 mm | https://vinatools.com/static/bessey-mirror/pages/edge-clamp-kt5-7779b5d166.html