Clamping force up to 1,200 N Change from clamping to spreading by switching, not converting Handle with pump lever parallel to the rail Convenient one-handed operation, with little effort required All-round clamping – in front of
Reversing
Don't disassemble the clamp – JUST TURN THE KNOB! The practical turning knob allows you to switch easily at any time from clamping to spreading.
Parallel handle with pump lever
The ergonomically shaped handle with pump lever runs parallel to the rail. That way, balanced, safe handling is always guaranteed.
Rapidly-adjustable release lever
A press of a button is all it takes: the release lever allows the clamp to be immediately released, as well as rapidly adjusted.
Large jaw faces
The large, planar jaw faces made from impact- and fracture-resistant reinforced polyamide are exactly parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers.
Furniture and joinery works
Kitchen construction and shop fitting
Use the product only in its original condition.
Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).
Clean the rails with solvent.
| Specification | Value |
|---|---|
| Openingmm | 160 |
| Throat depthmm | 85 |
| Spreading widthmm | 75–235 |
| Spreading width rearmm | 9–170 |
| Railmm | 15x5 |
| Weightkg | 0.655 |
| SKU Code | Price (EUR) | Buy | Stock | Auxiliary jaw | Jaw depth | Jaw opening | Main jaw | Piece count | Rail section | Weight | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ⋮⋮ | DUO16-8 | €43.60 | 6 | 9-170mm | 85mm | 160mm | 75-235mm | minimum quantity 6 | 20x5mm | 655g | ||
| ⋮⋮ | DUO30-8 | €48.21 | 5 | 9-315mm | 85mm | 300mm | 75-380mm | minimum quantity 6 | 20x5mm | 720g | ||
| ⋮⋮ | DUO45-8 | €52.54 | 9-470mm | 85mm | 450mm | 75-535mm | minimum quantity 6 | 20x5mm | 825g | |||
| ⋮⋮ | DUO65-8 | €58.51 | 9-660mm | 85mm | 650mm | 75-685mm | minimum quantity 6 | 20x5mm | 1,020g |
| SKU | Image | Price VNĐ | Product name & short description | |
|---|---|---|---|---|
| MCX |
![]() |
€61.88
|
Mitre clamping system
Mitre system for 22.5°, 30°, 45° and 60°angles Even pressure on the mitre Angle adapter can be changed without tools Practical accessory for BESSEY screw clamps TG,GZ, GMZ, EZ360, EHZ, EZS, DUO and EZL/EZXL
|
|
| KT5 |
![]() |
€34.36
|
Edge clamp
Practical accessory for clamping edges and difficult to reach areas Suitable for conventional screw clamps with a max. rail thickness of 13 mm
|










| SKU Code | Price (EUR) | Stock | |
|---|---|---|---|
| Loading variants... | |||


