Hotline: 096 779 3398 Email: [email protected]
Wood carving tool set

Wood carving chisel set Kirschen 5414000, 14 pieces

★ 0.0 (0 reviews)
Sold: 1
Views: 0
Imported from: Germany
Origin: Made in Germany

Fourteen micro carving chisels sit in a fitted wooden box, each 170 mm long. The blades are forged from high-carbon tool steel and hardened to about 61 HRC. A factory bevel of 25° suits soft to medium-hard wood. Octagonal hornbeam handles keep each tool steady on the bench during detail work. Kirschen forges the tools in Remscheid, Germany.

SKU: 5414000
€1,048.34
Stock status: Out of stock
Indicative price
Description

This wood carving chisel set gathers 14 micro carving chisels in one fitted wooden box. Each tool measures 170 mm, a length that favours close control in the hand. The blades come from high-carbon tool steel, forged and then hardened to roughly 61 HRC. Two thirds of each blade length is hardened, so the edge holds its geometry through repeated honing.

The factory grinding angle is 25°, a bevel suited to soft and medium-hard timber. Blade faces are polished without grinding marks, which helps the cut leave a clean surface. Handles are turned from hornbeam and shaped in an octagonal section. That section stops the tools rolling off a sloped bench. Kirschen has forged chisels in Remscheid since 1858, with forging and hardening monitored electronically.

Wood carving chisel set with 14 tools and 61 HRC blades

Blade steel, hardness and grind

Hand forging shapes each blade before hardening, a route the maker uses across its chisel programme. The steel carries a high carbon content, which supports the stated hardness figure. Polishing removes scoring from the flat faces, so shavings release instead of dragging. The 25° bevel arrives ready to use, yet most carvers refine it on a stone before the first cut.

  • 14 micro carving chisels per set
  • Blade material: high-carbon tool steel
  • Hardness: approximately 61 HRC
  • Hardened zone: 2/3 of blade length
  • Factory grinding angle: 25°
  • Blade faces polished free of grinding marks

Hardness measured over the working length is the figure that matters for edge retention in fine work. Kirschen states 61 HRC across the usable blade length, above the DIN reference value. Combined with the shallow 25° bevel, the edge cuts cleanly in lime, pine, walnut and similar species. Harder timbers usually call for a steeper secondary bevel added by the user.

Handles, dimensions and storage

Hornbeam is the hardest handle wood used in the Kirschen range, and the handles are shaped by hand. The octagonal form gives index points for the fingers when the tool is rotated during a cut. A length of 170 mm keeps the tool close to the work. The wooden case holds every chisel in a matching recess, which protects the edges between sessions.

  • Length per tool: 170 mm
  • Handle material: hornbeam
  • Handle shape: octagonal
  • Supplied in a fitted wooden box
  • Manufactured in Germany

A fixed storage position for each tool shortens the search during work and reduces edge contact between blades. The box also travels well to a workshop or a course. Replacement empty boxes are available separately under article 3553000, which is useful if the original case is damaged over years of use.

Common applications

The set covers decorative carving on wood surfaces: ornament, lettering, relief detail and the cleaning up of fine corners. Furniture makers use these tools for applied ornament and for reworking mouldings. Restorers reach for them when matching original carved detail on antique pieces. Instrument makers apply them to scrolls and small hollows. The short length also suits model work and lettering practice where a full-size carving chisel is too coarse.

First setup and rust protection

Blades leave the factory under a thin varnish that prevents rust in transit. Remove this film with thinner before the first cut. Once the varnish is gone, the steel is exposed and will corrode. Oil the blade immediately after setup. Wipe each tool with an oily cloth after every session and return it to the box.


Specifications

  • Set content: 14 micro carving chisels
  • Tool type: decorative carving chisels
  • Length per tool: 170 mm
  • Blade material: high-carbon tool steel
  • Blade hardness: approximately 61 HRC
  • Hardened zone: 2/3 of blade length
  • Factory grinding angle: 25°
  • Blade finish: polished, free of grinding marks
  • Handle material: hornbeam
  • Handle shape: octagonal
  • Packaging: fitted wooden box with recesses
  • Suitable wood range: soft to medium-hard timber
Optional Accessories
SKU Image Price VNĐ Product name & short description
5301000 Kirschen decorative carving tool with hornbeam handle, 1,5 mm, sweep 1, straight, octagonal handle
€68.69
Kirschen decorative carving tool with hornbeam handle, 1,5 mm, sweep 1, straight, octagonal handle
Lưỡi thẳng kiểu số 1 rộng 1.5 mm phục vụ chạm khắc chi tiết tinh xảo trên gỗ, từ đường nét khuôn mặt đến tóc, mi mắt và nếp gấp. Cán gỗ sồi trắng dạng bát giác giúp cầm chắc, lưỡi thép tôi đạt độ cứng 61 HRC với góc mài 25° mang lại cạnh sắc bền và khả năng k…
5300000 Kirschen decorative carving tool with hornbeam handle, 1,5 mm, sweep 1, bent, octagonal handle
€74.96
Kirschen decorative carving tool with hornbeam handle, 1,5 mm, sweep 1, bent, octagonal handle
Lưỡi cong kiểu số 1 rộng 1,5 mm phục vụ công việc chạm khắc tinh xảo trên gỗ, đặc biệt khi cần tạo đường nét mảnh, chi tiết khuôn mặt, nếp gấp, mắt, lông mi hay tóc. Thân đục hình bát giác giúp cầm chắc, cán gỗ sồi trắng mang lại cảm giác thoải mái khi làm vi…
5302000 Kirschen decorative carving tool with hornbeam handle, 1,5 mm, sweep 1, skewed, octagonal handle
€68.69
Kirschen decorative carving tool with hornbeam handle, 1,5 mm, sweep 1, skewed, octagonal handle
Có lưỡi thẳng cạnh nghiêng rộng 1,5 mm, thuộc dòng Stich 1, phục vụ các công việc chạm khắc tinh xảo trên gỗ. Cán gỗ sồi trắng thiết kế bát giác dài 170 mm, trọng lượng 28 g, mang lại độ cầm vừa tay và kiểm soát chính xác. Góc mài 25°, độ cứng 61 HRC, phù hợp…
5303000 Kirschen decorative carving tool with hornbeam handle, 1 mm, sweep 3, straight, octagonal handle
€74.96
Kirschen decorative carving tool with hornbeam handle, 1 mm, sweep 3, straight, octagonal handle
Phục vụ khắc chi tiết tinh xảo như đường nét khuôn mặt, nếp gấp, lông mi và tóc trên gỗ. Lưỡi thẳng được mài ở góc 25°, đạt độ cứng 61 HRC, cán gỗ sồi trắng hình bát giác dài 170mm giúp cầm vững khi tác nghiệp lâu. Sản xuất tại Đức theo tiêu chuẩn nghề điêu k…
5306000 Kirschen decorative carving tool with hornbeam handle, 1 mm, sweep 6, straight, octagonal handle
€74.96
Kirschen decorative carving tool with hornbeam handle, 1 mm, sweep 6, straight, octagonal handle
Dùng cho công việc chạm khắc tinh xảo trên gỗ, đục Kirschen 5306000 có lưỡi thẳng rộng 1mm kiểu số 6, tay cầm gỗ sồi trắng dạng bát giác. Lưỡi đạt độ cứng 61 HRC với góc mài 25°, phù hợp để tạo đường nét mảnh, chạm khuôn mặt, nếp gấp, mắt, lông mi và tóc. Chi…
5315000 Kirschen decorative carving tool with hornbeam handle, 1 mm, sweep 6, bent, octagonal handle
€79.13
Kirschen decorative carving tool with hornbeam handle, 1 mm, sweep 6, bent, octagonal handle
Lưỡi cong số 6 với bề rộng 1mm phục vụ chạm khắc các đường nét tinh tế, khuôn mặt, nếp nhăn và chi tiết trang trí trên gỗ. Thép đạt độ cứng 61 HRC, góc mài 25° giúp duy trì sắc bén lâu dài. Cán gỗ sồi trắng hình bát giác chống lăn, chiều dài tổng thể 170mm, t…
5311005 Kirschen decorative carving tool with hornbeam handle, 0,5 mm, sweep 11, straight, octagonal handle
€79.13
Kirschen decorative carving tool with hornbeam handle, 0,5 mm, sweep 11, straight, octagonal handle
Lưỡi thẳng 0.5mm cho phép khắc các đường nét tinh xảo như nếp gấp, mắt, mi, tóc và chi tiết khuôn mặt trên gỗ. Cán gỗ sồi trắng dạng bát giác giúp cầm chắc, lưỡi thép đạt độ cứng 61 HRC và góc mài 25° mang lại độ sắc bền. Model này thuộc dòng đục chạm trang t…
5311100 Kirschen decorative carving tool with hornbeam handle, 1 mm, sweep 11, straight, octagonal handle
€74.96
Kirschen decorative carving tool with hornbeam handle, 1 mm, sweep 11, straight, octagonal handle
Chuyên dùng cho các chi tiết trang trí cực kỳ tinh xảo như đường nét khuôn mặt, nếp gấp, lông mi và tóc trên gỗ. Thân đục hình bát giác giúp cầm chắc tay, tay cầm gỗ sồi trắng mang lại cảm giác thoải mái khi làm việc lâu. Lưỡi thẳng được mài góc 25° và tôi đạ…
5311150 Kirschen decorative carving tool with hornbeam handle, 1,5 mm, sweep 11, straight, octagonal handle
€68.69
Kirschen decorative carving tool with hornbeam handle, 1,5 mm, sweep 11, straight, octagonal handle
Thuộc dòng đục chạm trang trí Kirschen sản xuất tại Đức, lưỡi thẳng kiểu số 11 với độ rộng 1,5 mm. Tay cầm bát giác bằng gỗ sồi trắng dài 170 mm, trọng lượng 28 g. Góc mài 25°, độ cứng 61 HRC. Phục vụ các công việc chạm khắc trang trí tinh xảo, đặc biệt khi c…
5320005- Kirschen decorative carving tool with hornbeam handle, 0,5 mm, sweep 11, bent, octagonal handle
€85.41
Kirschen decorative carving tool with hornbeam handle, 0,5 mm, sweep 11, bent, octagonal handle
Lưỡi cong 0.5 mm cho phép chạm khắc các đường nét tinh xảo như nếp gấp, đường viền khuôn mặt, lông mi và tóc trên gỗ. Cán gỗ sồi trắng bát giác giúp cầm nắm chắc chắn, lưỡi thép đạt độ cứng 61 HRC với góc mài 25° mang lại độ sắc bén và độ bền cao. Chiều dài t…
5320100 Kirschen decorative carving tool with hornbeam handle, 1 mm, sweep 11, bent, octagonal handle
€79.13
Kirschen decorative carving tool with hornbeam handle, 1 mm, sweep 11, bent, octagonal handle
Lưỡi cong độ rộng 1 mm, độ cứng 61 HRC và góc mài 25° giúp gia công các đường nét tinh xảo trên gỗ. Tay cầm gỗ sồi trắng mang lại độ bám chắc chắn khi chạm khắc chi tiết như nếp gấp, đường viền khuôn mặt hay họa tiết trang trí. Chiều dài tổng thể 170 mm, trọn…
5339000 Kirschen decorative carving tool with hornbeam handle, 1,5 mm, sweep 39, straight, octagonal handle
€68.69
Kirschen decorative carving tool with hornbeam handle, 1,5 mm, sweep 39, straight, octagonal handle
Được chế tạo tại Đức, phục vụ các công việc chạm khắc trang trí tinh xảo trên gỗ. Cán gỗ sồi trắng bát giác dài 170 mm mang lại độ cầm vững, trọng lượng 28 g giúp kiểm soát tốt khi tạo đường nét chi tiết. Độ cứng lưỡi đạt 61 HRC, góc mài 25° cho khả năng cắt…
5340000 Kirschen decorative carving tool with hornbeam handle, 1,5 mm, sweep 39, bent, octagonal handle
€74.96
Kirschen decorative carving tool with hornbeam handle, 1,5 mm, sweep 39, bent, octagonal handle
Đục chạm trang trí lưỡi cong hình chữ V số 39 với chiều rộng lưỡi 1,5 mm, tay cầm gỗ sồi trắng hình bát giác, chiều dài tổng thể 170 mm. Lưỡi thép đạt độ cứng 61 HRC, góc mài 25°, phục vụ các công việc chạm khắc trang trí tinh xảo trên gỗ. Trọng lượng 28 g, s…

Product reviews

Based on 0 reviews
0.0
Overall
5★ 0
4★ 0
3★ 0
2★ 0
1★ 0

Be the first to review “Wood carving chisel set Kirschen 5414000, 14 pieces”

🎁 Write a review to earn 20 reward points — photo +10, video +15.
Accumulate reward points to redeem unique gifts from Minh Khang Vinatools. Log in
Please log in to submit a review.
Recently viewed
No items yet