Light duty bar clamp U-style LMU

Name: Light duty bar clamp U-style LMU
Brand: BESSEY
SKU: LMU-
Price: 380000.0 VND
Availability: PreOrder
Rating: 5.0 (3 reviews)

★ 5.0 (3 reviews) • Sold 101

Imported from: Germany

Clamping force up to 1,500 N Step‐over clamping Comes with two protective caps Small and easy to handle Light weight

SKU: LMU-

434.000 đ - 467.000 đ

Stock status: Đặt hàng chờ nhập 4-8 tuần

Price includes VAT

Description

Product details

Clamping force up to 1,500 N
Step‐over clamping
Comes with two protective caps
Small and easy to handle
Light weight

Product description

Step‐over clamping U‐shape

The rail is made of quality steel drawn in a single piece for durability and strenght. The U‐shape of the rail enables step‐over clamping up to 20 mm so you can get to those hard‐to‐reach places.

Sliding arm

The sliding arm is made of die-cast zinc. It is light, stable and break-resistant.

Protective caps

Particularly sensitive workpieces are effectively protected thanks to the protective caps. For all-round gentle clamping.

Areas of application

Furniture and joinery works

Kitchen construction and shop fitting

Interior fittings
DIY
Rapid, gentle clamping

Safety information

Use the product only in its original condition.

Use the product only for its intended purpose. Improper use can cause personal injury or property damage.

Wear safety glasses to protect your eyes.
Wear work or assembly gloves to protect your hands.
Wear safety footwear to protect your feet.
Thew handle must always be free of oil and grease to prevent slipping.
Keep the product out of reach of children.
Small parts must not be swallowed or inserted into body openings.
Check the product for damage before each use and make sure that all moving parts are working properly.
A damaged product must not be used.
Follow the care instructions for each product – see vinatools.com.
Use only original BESSEY spare parts
The clamping tool must not be used for lifting, pulling or leaning.
The clamping tool must not be used to secure cargo during transportation.
The clamping tool may only be tightened by hand without any additional aids.
The clamping tool must not be used for permanent installation.
Regularly check that the end stop is working properly when using clamps.

Material / Surface

Lower section made of zinc die-cast, galvanised

Rail made of galvanised steel

Spindle with trapezoidal thread in rolled steel, galvanised
Handle made of wood, water-based paint
Pressure plate made of steel, cold pressed, galvanised
Protective caps made of plastic

Care instructions

Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).

Clean the rails with solvent.

Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
Clean the fluting on the rails with a steel brush.
Clean and oil the spindle regularly.
Clean and oil the pressure plate regularly.

Specification	Value
Opening (mm)	100
Throat depth (mm)	50
Rail (mm)	15x5
Weight (kg)	0.23

Specifications

Má kẹp bọc nhựa, gắn sẵn, bảo vệ phôi mềm.
Thanh cái trơn, phẳng, cắt khía chống tuột ngàm dưới.
Trọng lượng: Nhẹ, thích hợp cho không gian hẹp
Lực kẹp: Có thể điều chỉnh lên đến 1,500 N (tương đương 150kg)
Vật liệu trục vít: Gia công bằng công nghệ ép áp lực cao
Tay cầm: Bằng gỗ tiện, sơn đỏ, xử lý chống mối mọt
Thanh ray: Thép công cụ với thiết diện 15x5mm.
Thiết kế: Thanh trượt đúc bằng thép mạ kẽm, thiết diện chữ T
Má kẹp: Có miếng lót bằng nhựa tháo lắp được
Độ sâu cổ kẹp: 50mm

Tags / Keywords: Light duty bar clamp U-style LMU LMU-

Price list & Ordering