U-shaped high-performance clamp SGU

Name: U-shaped high-performance clamp SGU
Brand: BESSEY
SKU: SGU30-14-10
Price: 6651000.0 VND
Availability: InStock

★ 0.0 (0 reviews) • Sold 0

Imported from: Germany

Clamping force up to 12,000 N at tightening torque of 40 Nm Double-sided step-over clamping, specially suited for T-profiles and double T-profiles Long life due to heat-resistant pressure plate with sintered steel insert, which ca

SKU: SGU30-14-10

6.651.000 đ

Stock status: 1

Price includes VAT

Description

Product details

Clamping force up to 12,000 N at tightening torque of 40 Nm
Double-sided step-over clamping, specially suited for T-profiles and double T-profiles
Long life due to heat-resistant pressure plate with sintered steel insert, which can be tilted up to 35°

Product description

Extremely sturdy

The U-shaped fixed arm is produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness.

Special tilting pressure plate

The heat-resistant pressure plate (SGU/STBU) is replaceable and can be tilted up to 35° so it can even clamp on angled or sloping surfaces. It has an extremely long service-life due to the oil-soaked sintered steel insert's excellent sliding and emergency running properties.

Forged sliding arm

The sliding arm is made from forged tempered steel, and can withstand extremely large loads. You can be sure of that.

Tempered spindle

The tempered spindle is particularly sturdy and wear-resistant. This considerably increases its durability.

Sturdy tommy bar

The sturdy tommy bar has special rounded hand-friendly ends, as well as a hexagonal bolt. This allows powerful, controlled clamping.

Areas of application

Metal construction

Locksmith work

Step-over clamping

Safety information

Use the product only in its original condition.

Use the product only for its intended purpose. Improper use can cause personal injury or property damage.

Wear safety glasses to protect your eyes.
Wear work or assembly gloves to protect your hands.
Wear safety footwear to protect your feet.
Thew handle must always be free of oil and grease to prevent slipping.
Keep the product out of reach of children.
Small parts must not be swallowed or inserted into body openings.
Check the product for damage before each use and make sure that all moving parts are working properly.
A damaged product must not be used.
Follow the care instructions for each product – see vinatools.com.
Use only original BESSEY spare parts
The clamping tool must not be used for lifting, pulling or leaning.
The clamping tool must not be used to secure cargo during transportation.
The clamping tool may only be tightened by hand without any additional aids.
The clamping tool must not be used for permanent installation.
Regularly check that the end stop is working properly when using clamps.

Material / Surface

Fixed and sliding bracket made of tempered steel, galvanised

Spindle with trapezoidal thread in tempered, rolled steel, phosphated

Toggle made of steel, galvanised
Pressure plate made of steel, phosphated

Care instructions

Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).

Clean the rails with solvent.

Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
Clean and oil the spindle regularly.
Clean and oil the pressure plate regularly.
If the rail is shiny, roughen both narrow sides with emery cloth (100 grain).

Specification	Value
Opening (mm)	300
Throat depth (mm)	140
Clamping depth (mm)	100, 130
Rail (mm)	30x15
Weight (kg)	3.75
Clamping depth (mm)	100
Clamping depth (mm)	130

Specifications

Lực kẹp: tối đa 12,000 N
Mô-men siết: 40 Nm
Góc nghiêng má kẹp động: 35°
Chất liệu tay kẹp: thép tôi luyện, mạ kẽm
Tay trượt: thép rèn, chịu tải cao
Trục vít: thép cán, tôi cứng, xử lý phosphat
Thanh vặn: thép mạ kẽm, có đầu bu-lông lục giác
Bề mặt má kẹp động: xử lý phosphat

Tags / Keywords: U-shaped high-performance clamp SGU SGU30-14-10

Products in same folder